DS54-0005 Datasheet, PDF (1/4 Pages) Tyco Electronics – Low Cost Four-Way GMIC SMT Power Divider 824 . 960 MHz

DS54-0005
Low Cost Four-Way GMIC SMT Power Divider
824 – 960 MHz
Rev. V2
Features
• Low Cost
• Small Size and Low Profile
• Superior Repeatability (Lot-to-Lot Variation)
• Typical Insertion Loss: 0.8 dB
• Typical Isolation: 24 dB
• Typical Amplitude Balance: 0.3 dB
• SOIC-8 Package
Description
M/A-COM’s DS54-0005 is an IC-based monolithic
power divider using M/A-COM’s GMIC technology in
a low cost SOIC-8 plastic package. This 4-way
power divider is ideally suited for applications
where PCB real estate is at a premium and standard
packaging for automated assembly and low cost are
critical. Typical applications include infrastructure,
portables, and peripheral devices (PCMCIA cards)
for wireless standards such as GSM, AMPS, CDPD,
RAM, and ARDIS. Available in tape and reel.
The DS54-0005 is fabricated using a passive-
integrated circuit process. The process features full-
chip passivation for increased performance and
reliability.
Functional Diagram
RF 1
RF 2
RF IN
GND
GND
GND
RF 4
RF3
1. Pins 2, 6, and 7 must be DC and RF grounded.
Ordering Information
Part Number
DS54-0005
DS54-0005-TR
Package
Bulk Packaging
2000 piece reel
Note: Reference Application Note M513 for reel size
information.
Pin Configuration
Pin No.
1
2
3
4
Function
RF 1
RF IN
GND
RF 4
Pin No.
5
6
7
8
Function
RF 3
GND
GND
RF 2
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.