DS53-0005 Datasheet, PDF (1/3 Pages) Tyco Electronics – Low Cost Three-Way GMIC SMT Power Divider 1850 . 1990 MHz

DS53-0005
Low Cost Three-Way GMIC SMT Power Divider,
1850 - 1990 MHz
Rev. V4
Features
• Small Size and Low Profile
• SOIC-8 Package
• Excellent Amplitude and Phase Balance
• Superior Repeatability
• Typical Insertion Loss: 1.0 dB
• Typical Isolation: 18 dB
• 1 Watt Power Handling
Description
M/A-COM’s DS53-0005 is an IC-based monolithic
power divider using M/A-COM’s GMIC technology in
a low cost SOIC-8 plastic package. This 3-way
power divider is ideally suited for applications where
small size, low insertion loss, superior phase/
amplitude tracking and low cost are required. Typi-
cal applications include personal communication
systems and other communication applications
where size and PCB real estate are at a
premium. Available in tape and reel.
The DS53-0005 is fabricated using a passive-
integrated circuit process. The process features full-
chip passivation for increased performance and reli-
ability.
Functional Diagram
GND
RF IN
GND
GND
RF1
RF2
GND
RF3
Pin Configuration
Pin No.
1
2
3
4
Function
GND
RF IN
GND
GND
Pin No.
5
6
7
8
Ordering Information
Function
RF3
GND
RF2
RF1
Part Number
DS53-0005
DS53-0005-TR
Package
Bulk Packaging
1000 piece reel
Note: Reference Application Note M513 for reel size
information.
Electrical Specifications: T_A = 25°C¹
Parameter
Insertion Loss above 4.8 dB
Isolation
VSWR Input
Amplitude Balance
Phase Balance
Units
dB
dB
Ratio
dB
Deg.
1. All specifications apply with a 50-ohm source and load impedance.
Min
—
12
—
—
—
Typ
1.0
18
1.8:1
0.3
7
Max
1.4
—
2.0:1
0.6
14
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.