DS52-0014 Datasheet, PDF (1/4 Pages) Tyco Electronics – Low Cost Two-Way GMIC SMT Power Divider 1700-2000MHz

DS52-0014
Low Cost Two-Way GMIC SMT Power Divider
1700 – 2000 MHz
Features
• Small Size and Low Profile
• Typical Insertion Loss: 0.6 dB
• Typical Amplitude Balance: 0.2 dB
• 1 Watt Power Handling
• SOT-26 Package
Description
M/A-COM’s DS52-0014 is an IC-based monolithic
power divider using M/A-COM’s GMIC technology in
a low cost SOT-26 plastic package. This 2-way
power divider is ideally suited for applications where
small size, low insertion loss, superior
phase/amplitude tracking and low cost are required.
Typical applications include handsets, base station
switching networks and other communication
applications where size and PCB real estate are at
a premium. Available in Tape and Reel.
The DS52-0014 is fabricated using a passive inte-
grated circuit process. The process features full-chip
passivation for increased performance and reliability.
Functional Diagram
Rev. V4
Ordering Information
Part Number
DS52-0014
DS52-0014-TR
Package
Bulk Packaging
1000 piece reel
Note: Reference Application Note M513 for reel size
information.
Pin Configuration
Pin No.
1
2
3
Function
RF1 (OUT)
GND
RF2 (OUT)
Pin No.
4
5
6
Function
GND
GND
RF IN
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.