MA14SH Datasheet, PDF (2/5 Pages) Lumins Inc. – Cast aluminum LED board heat sink.

Please visit our web site www.luminis.com for complete I.E.S. formatted download data.
Refer to page 4 for additional information.
MA14/MA14SH SERIES
MAYA - LED
LUMINAIRE SELECTION
MODEL#
MA14
LED LIGHT SELECTION
Input Delivered
Watts Lumens
Type II
46W
61W
96W
3378 Lms.
5138 Lms.
7410 Lms.
Type III
49W
62W
96W
3847 Lms.
5210 Lms.
7368 Lms.
Model
MA14
MA14-L21W48-LD2
MA14-L42W60-LD2
MA14-L42W100-LD2
MA14SH
MA14SH-L21W48-LD2
MA14SH-L42W60-LD2
MA14SH-L42W100-LD2
MA14-L21W48-LD3
MA14-L42W60-LD3
MA14-L42W100-LD3
MA14SH-L21W48-LD3
MA14SH-L42W60-LD3
MA14SH-L42W100-LD3
Type IV
40W
60W
92W
3160 Lms.
4710 Lms.
6679 Lms.
MA14-L21W48-LD4
MA14-L42W60-LD4
MA14-L42W100-LD4
MA14SH-L21W48-LD4
MA14SH-L42W60-LD4
MA14SH-L42W100-LD4
MA14SH
Type VS
47W
58W
95W
2970 Lms.
4445 Lms.
6332 Lms.
MA14-L21W48-LD5S
MA14-L42W60-LD5S
MA14-L42W100-LD5S
MA14SH-L21W48-LD5S
MA14SH-L42W60-LD5S
MA14SH-L42W100-LD5S
Note: Above wattage values are based on 277V, tested at 25ºC ambient temperature.
Wattage may vary by approx. +/- 10% for other voltages or changes in ambient temperature.
Lumens output will remain constant.
VOLTAGE ¹
FINISH
STANDARD COLORS
120V
277V
347V
480V
WHT Snow white
BKT Jet black
BZT Bronze
MST Matte silver
GRT Titanium gray
DGT Gun metal
CHT Champagne
Optional colors
CS Custom color
RAL RAL# color
(Refer to color chart)
OPTIONS
ELECTRICAL
PH
FS
SP
DC1
DM
MSD
K2A
K3L
K5L
Photocell
Fuse
Surge protector 10KV
120/277V Dynadimmer control
120/277 or 347/480V 0-10V
Dimming driver (25% dimming)
Motion Sensor Device (Hi/Low to
25%. (DM option must be selected)
Amber LED for turtle sensitive areas
Wavelengths: 584.5 nm to 597 nm
3000K CCT LED
5000K CCT LED
Mounting
ACA Pole mounted attachment with 45º
support
ACW Wall mounted attachment with 45º
support
EC3P Pole mounted twin arm attachment
EC3PS Pole mounted twin arm attachment
- short version (luminiare without
shade only)
EC3W Wall mounted twin arm attachment
EC3WS Wall mounted twin arm attachment
- short version (luminaire without
shade only)
TN3 3” Tenon pole adaptor
ACCESSORIES
LP
LPC
BLC
SH
High impact U.V. stabilized acrylic
lens - 10% light loss
Clear polycarbonate vandal
resistant lens
Back light control
30” Diameter aluminum shade
(same color as luminaire)
Option details
DC1: Philips Dynadimmer™ is a step dimming control providing programmable schedules up to five different settings. The Dynadimmer™ uses the
midnight point calculation to determine the absolute time between switching on/off time. Factory default settings:
T1 (Time 1 on @ 4PM) D1 (Light level @ 100%)
T2 (Time 2 @ 10PM) D2 (Light level step dimming @ 50%)
T3 (Time 3 @ 4AM) D3 (Light level resumes to 100% until 6 AM.)
Programmer tool unit for on site programming available on request. # DCR1. Other factory settings are available on request.
NOTES
1- Luminaires are factory prewired for 120V (if no voltage is specified.) For other voltages, please specify with catalog number, or consult factory.
2- Fuse and photo cell options are normally installed with poles when specified with Luminis luminaires. (Except for other types of mounting.)
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
LUMINIS.COM
2