MA14SH Datasheet, PDF (1/5 Pages) Lumins Inc. – Cast aluminum LED board heat sink.

Type:
QUANTITY:
Project:
Catalog
number:
Fixture
Wattage Voltage
MA14/MA14SH SERIES
MAYA - LED
Finish
Option
Option
Option Option
1
MA14
1- Cast aluminum LED board heat sink.
2
2- MA14SH: 30” Diameter hard aluminum
optional shade.
3- Clear tempered glass lens.
3
4- Set of two cast aluminum supporting
struts.
4
5- Black top sealed housing cover.
5
6- Cast aluminum top assembly base
support with hinged mechanism.
7- 120/277V or 347/480V electronic driver _MA14SH
power supply.
6
8- Lower cast aluminum houing with 4”-5”
(102-127) O.D. pole adaptor.
7
8
Materials
MayaLED is made of corrosion resistant 356 aluminum alloy with a copper
(CU) content of less than 0.1%.
LED PC board is assembled on a thick pad housing chamber designed with a
heat sink pattern to optimize heat dissipation and luminaire efficacy. The power
supply is enclosed in a separate cast aluminum chamber allowing a quick
access for electrical maintenance without disturbing the optical light chamber.
LED PC board and optical lenses are protected from weather abrasion with
a clear tempered glass to ensure optimal lighting performance.
LED PC board is removable and replaceable for ease of maintenance or
lighting upgrade.
Electrical
LED
POWER SUPPLY 120/277V multi volt, or 347-480V (50-60Hz) with a
minimum operating temperature of -40ºC/-40ºF.
LEd
Type II-III-IV or VS light distribution with high performance
optical lenses. Standard 4000K LED. LED system is available
with three intensity levels of 46/61/96W.
LIFE
80,000hrs (L B ) based on LM-80 report for lumen maintenance
70 50
(150,000hrs for model L42W60).
Finish
Five-stage preparation process including preheating of cast aluminum parts
for air extraction, and an environmentally friendly alloy sealant. Polyester
powder coating is applied through an electrostatic process, and oven cured
for long term finish.
Mounting
Maximum weight: 28lbs (12.7kg)
MayaLED is designed for ease of access and installation. The luminaire
slides over the mounting plate, minimizing installation effort. Designed for
wall or pole mount to fit with a 4” (102) pole (5” (127) on request). Alternate
poles or wall attachments are proposed to meet multiple installation
conditions. (Refer to page 3)
Certification
Tested to UL1598 and CSA22.2 #250. ETL listed for wet location.
Photometric testing performed by an independent laboratory in accordance
with IES LM-79-08 standards at 25ºC/77ºF. Lumen depreciation in
accordance with IESNA LM80 standards.
CE Certification on request.
Rated IP65.
17”
(432)
30”
(762)
MA14
Luminaire
less shade.
EPA: 0.70
28”
(711)
MA14SH
Luminaire with
SH optional shade.
EPA: 1.13
Access to
electrical
components
MayaLED features a
unique tool-less swing
out shade assembly,
allowing a quick
access to luminaire
maintenance,
leaving a clean
optical chamber to
ensure a high lumen
performance.
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
LUMINIS.COM
1