MA12 Datasheet, PDF (2/4 Pages) Systemsensor advanced ideas. – Multi-Alert & Mini-Alert Sounders and Strobes

Please visit our web site www.luminis.com for complete I.E.S. formatted download data.
Refer to page 4 for additional information.
MA10/MA12 SERIES
MAYA - LED
LUMINAIRE SELECTION
MODEL#
LED LIGHT SELECTION
VOLTAGE ¹
MA10
Type II
Input Delivered
Watts Lumens

46W 3378 Lms.
61W 5138 Lms.
96W 7410 Lms.
Model

MA10
MA12
MA10-L21W48-LD2
MA12-L21W48-LD2
MA10-L42W60-LD2
MA12-L42W60-LD2
MA10-L42W100-LD2
MA12-L42W100-LD2
Type III
49W
62W
96W
3847 Lms.
5210 Lms.
7368 Lms.
MA10-L21W48-LD3
MA10-L42W60-LD3
MA10-L42W100-LD3
MA12-L21W48-LD3
MA12-L42W60-LD3
MA12-L42W100-LD3
120V
277V
347V
480V
Type IV
40W
60W
92W
3160 Lms.
4710 Lms.
6679 Lms.
MA10-L21W48-LD4
MA10-L42W60-LD4
MA10-L42W100-LD4
MA12-L21W48-LD4
MA12-L42W60-LD4
MA12-L42W100-LD4
MA12
Type VS
47W
58W
95W
2970 Lms.
4445 Lms.
6332 Lms.
MA10-L21W48-LD5S
MA10-L42W60-LD5S
MA10-L42W100-LD5S
MA12-L21W48-LD5S
MA12-L42W60-LD5S
MA12-L42W100-LD5S
Note: Above wattage values are based on 277V, tested at 25ºC ambient temperature.
Wattage may vary by approx. +/- 10% for other voltages or changes in ambient temperature.
Lumens output will remain constant.
FINISH
STANDARD COLORS
WHT Snow white
BKT Jet black
BZT Bronze
MST Matte silver
GRT Titanium gray
DGT Gun metal
CHT Champagne
Optional colors
CS Custom color
RAL RAL# color
(Refer to color chart)
OPTIONS
ELECTRICAL
PH
FS
SP
DC1
DM
MSD
K2A
K3L
K5L
Photocell
Fuse
Surge protector 10KV
120/277V Dynadimmer control
120/277 or 347/480V 0-10V
Dimming driver (25% dimming)
Motion Sensor Device (Hi/Low to
25%. (DM option must be selected)
Amber LED for turtle sensitive areas.
Wavelengths: 584.5 nm to 597 nm
3000ºK CCT LED
5000ºK CCT LED
Mounting
PDA Pole mount with rod
WDA Wall mount attachment with rod
P2 Pole twin mount @ 180º
P290 Pole twin mount @ 90º
P3 Pole triple mount @ 90º
P320 Pole triple mount @ 120º
P4 Pole quad mount
ACCESSORIES
LP High impact U.V. stabilized acrylic
lens - 10% light loss
LPC Clear polycarbonate vandal resistant
lens
BLC Back light control
Option details
DC1: Philips Dynadimmer™ is a step dimming control providing programmable schedules up to five different settings. The Dynadimmer™ uses the
midnight point calculation to determine the absolute time between switching on/off time. Factory default settings:
T1 (Time 1 on @ 4PM) D1 (Light level @ 100%)
T2 (Time 2 @ 10PM) D2 (Light level step dimming @ 50%)
T3 (Time 3 @ 4AM) D3 (Light level resumes to 100% until 6 AM.)
Programmer tool unit for on site programming available on request. Dynadimmer™ control unit is installed in pole. Option DCR1. Other factory
settings are available on request.
NOTES
1- Luminaires are factory prewired for 120V (if no voltage is specified.) For other voltages, please specify with catalog number, or consult factory.
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
2