MA12 Datasheet, PDF (1/4 Pages) Systemsensor advanced ideas. – Multi-Alert & Mini-Alert Sounders and Strobes

Type:
QUANTITY:
Project:
Catalog
number:
Fixture
Wattage Voltage
Finish
MA10/MA12 SERIES
MAYA - LED
Option
Option
Option Option
MA10 Pole mount
1
1- Driver and electrical control housing
2
constructed of corrosion resistant
cast aluminum.
2- Corrosion free cast aluminum
housing with an integral fin pattern
3
designed for heat dissipation and to
4
optimize LED performance.
5
3- LED PC board including optical
6
control lenses.
7
4- Aluminum removable lens frame.
MA12 Wall mount
5- Clear tempered glass lens for
protection of optical lenses against
weather abrasion.
6- Access cover to electrical
components.
7- Heavy gauge steel galvanized
universal mounting plate with
leveling adjustment.
6
7
Materials
MayaLED is made of corrosion resistant 356 aluminum alloy with a copper
(CU) content of less than 0.1%.
LED PC board is assembled on a thick pad housing chamber designed with
a heat sink pattern to optimize heat dissipation and luminaire efficacy. The
power supply is enclosed in a separate cast aluminum chamber allowing a
quick access for electrical maintenance without disturbing the optical light
chamber.
LED PC board and optical lenses are protected from weather abrasion with
a clear tempered glass to ensure optimal lighting performance.
LED PC board is removable and replaceable for ease of maintenance or
lighting upgrade.
Electrical
LED
POWER SUPPLY 120/277V multi volt, or 347-480V (50-60Hz) with a
minimum operating temperature of -40ºC/-40ºF.
LEd
Type II-III-IV or VS light distribution with high performance
optical lenses. Standard 4000ºK LED. LED system is
available with three intensity levels of 46/61/96W.
LIFE
80,000hrs (L B ) based on LM-80 report for lumen maintenance
70 50
(150,000hrs for model L42W60).
Finish
Five-stage preparation process including preheating of cast aluminum parts
for air extraction, and an environmentally friendly alloy sealant. Polyester
powder coating is applied through an electrostatic process, and oven cured
for long term finish.
Mounting
Maximum weight: 21lbs (9.5kg)
MayaLED is designed for ease of access and installation. The luminaire
slides over the mounting plate, minimizing installation effort. Designed for
wall or pole mount to fit with a 4” (102) pole (5” (127) on request). Alternate
poles or wall attachments are proposed to meet multiple installation
conditions. (Refer to page 3)
Certification
- Tested to UL1598 and CSA22.2 #250. ETL listed for wet location.
- Photometric testing performed by an independent laboratory in
accordance with IES LM-79-08 standards at 25ºC/77ºF.
- Lumen depreciation in accordance with IESNA LM80 standards.
- Vibration tested for 1.5G per ANSI C136.31-2010.
- Rated IP66 per IEC60529.
31”
(788)
17”
(432)
3.25”
(82)
EPA: .53
2”
(50)
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
1