SMD075-LO81 Datasheet, PDF (8/17 Pages) Lumileds Lighting Company – Mid-Power LED Light Source

Solder Pad Design
2.6
Anode
7
3.3
1.1
Solder mask
Cathode
Electrically no-connection (NC)
Heat release only
. _{Additional Cu area for improved heat dissipation}
. _{Cu area > 16 sq mm per pad}
. _{Electrically isolated with solder mask}
Figure 3. Solder pad layout.
Note for Figure 3:
- The drawing above shows the recommended SignalSure layout on Printed Circuit Board (PCB).
SignalSure Datasheet DS11 20121212
8