L219-2780006FV0C00 Datasheet, PDF (4/13 Pages) Lumileds Lighting Company – Flexible light source distributing uniform light across user selectable lengths

Performance Characteristics
Product Selection Guide
Table 1. Product performance of LUXEON XF-3014 CV at 24V, specified current, T_j=50°C.
CONFIGURATION
NOMINAL
CCT
MINIMUM
CRI ^[1]
LUMINOUS FLUX ^[2]
(lm)
MINIMUM TYPICAL
TYPICAL
LUMINOUS
EFFICACY
(lm/W)
REGULATED
CURRENT ^[3]
(mA)
SEGMENT
TYPE ^[4]
PART
NUMBER
2700K
80
86
98
95
42.5
Cuttable
L219-2780C06FV0000
6 LEDs, 96mm
(1 parallel x 6 series)
3000K
80
90
102
100
42.5
Cuttable
L219-3080C06FV0000
4000K
80
100
112
110
42.5
Cuttable
L219-4080C06FV0000
2700K
80
86
98
95
42.5
Connectors L219-2780006FV0C00
6 LEDs, 96mm
(1 parallel x 6 series)
3000K
80
90
102
100
42.5
Connectors L219-3080006FV0C00
4000K
80
100
112
110
42.5
Connectors L219-4080006FV0C00
2700K
80
430
490
95
212.5
Connectors L219-2780030FV0C00
30 LEDs, 480mm
(5 parallel x 6 series)
3000K
80
450
510
100
212.5
Connectors L219-3080030FV0C00
4000K
80
500
560
110
212.5
Connectors L219-4080030FV0C00
Notes for Table 1:
1. Lumileds maintains a tolerance of ±2 on CRI measurements.
2. Lumileds maintains a tolerance of ±7.5% on luminous flux measurements.
3. Supply should be capable of providing 42.5mA per 96mm segment or 6 LEDs in series. Current regulated to ±2.5mA for the 6 LED segments and ±12.5mA for the 30 LED segments.
4. Cuttable options feature pre-tinned solder terminals and comes in 19.2m continuous reel.
Electrical and Thermal Characteristics
Table 2. Electrical and thermal characteristics for LUXEON XF-3014 CV at 24V, specified current, T_j=50°C.
PART NUMBER
L219-xxxxxxxFV0000
TYPICAL INPUT
VOLTAGE (V) ^[1]
24
TEMPERATURE
COEFFICIENT OF
OUTPUT CURRENT ^[2] (%/°C)
-0.2
THERMAL RESISTANCE ^[3] (°C/W)
JUNCTION TO
SOLDER JOINT ^[4], RΘ_J-C
40
SOLDER JOINT TO
HEAT SINK ^[5], RΘ_C-HS
30
L219-xxxx0xxFV0C00
24
-0.2
40
30
Notes for Table 2:
1. See Figure 2 for light output vs. input voltage characteristics.
2. Per constant current regulator.
3. Tc is measurement point next to LED. See AB208 for details.
4. RѲ_J-C specified from LED junction to Tc (solder joint). Measured with flex strip laminated onto aluminum plate.
5. RѲ_C-HS specified from Tc to heat-sink. Measured with flex strip laminated on aluminum plate.
DS156 LUXEON XF-3014 CV Product Datasheet 20160803 ©2016 Lumileds Holding B.V. All rights reserved.
3