L135-27800BHV00001 Datasheet, PDF (15/21 Pages) Lumileds Lighting Company – High voltage package that reduces system BOM while achieving high efficacy

Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values given
in the technical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and
forward voltage (V_f).
Decoding Product Bin Labeling
LUXEON mid-power emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for
emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination.
Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given
application.
Reels of 2700K, 3000K, 3500K, 4000K, 5000K emitters are labeled with the CAT code following the format below.
ABCD
Where:
A—
B & C—
D—
Flux bin (L etc.)
Color bin (For example E, D, G, H, I, J, K, L, M )
V bin
f
Luminous Flux Bins
Table 7 and Table 8 list the standard photometric luminous flux bins for LUXEON mid-power emitters (tested and
binned at 15 mA). Although several bins are outlined, product availability in a particular bin varies by production
run and by product performance. Not all bins are available in all colors. Please contact your Philips Lumileds
representative for the L135-xx80-xBHV-00001 & L135-xx80-xCHV-00001 flux bins.
Flux Bin Labeling
Table 7. Flux Bins for L135-xx80-0BHV-00001
Bin Code
K
L
M
P
Q
R
S
Note for Table 7:
1. Tested and binned at 25°C, I_f = 15 mA. Tester tolerance: ± 7.5%.
Minimum Photometric Flux (lm)
28
32
36
40
44
48
52
Maximum Photometric Flux (lm)
32
36
40
44
48
52
56
LUXEON 3535 HV Datasheet DS206 20140305 ©2014 Philips Lumileds Lighting Company.
14