L130-2780003000W21 Datasheet, PDF (14/23 Pages) Lumileds Lighting Company – Hot color targeted 6V QFN package delivering high flux

Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values given
in the technical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and
forward voltage (V_f).
Decoding Product Bin Labeling
LUXEON mid-power emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin
values for emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable
bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for
consistency in a given application.
Reels for all emitters are labeled with the CAT code following the format below.
ABCD
Where:
A = Flux bin (H etc.)
B & C = Color bin (For example 8D, 8E, 8F, etc.)
D = V bin
f
Luminous Flux Bins
Table 6 and Table 7 list the standard photometric luminous flux bins for LUXEON 3030 2D mid-power emitters
(tested and binned at 120 mA and a junction temperature of 25°C). Although several bins are outlined, product
availability in a particular bin varies by production run and by product performance. Not all bins are available in all
colors. Please contact your Philips Lumileds representative for the supportable flux bins.
Table 6.
Bin Code
A
B
C
D
E
F
G
H
I
J
K
L
Note for Table 6:
1. Tested and binned at 25°C, I =120 mA. Tester tolerance: ± 7.5%.
f
Minimum Photometric Flux (lm)
50
55
60
65
70
75
80
85
90
95
100
105
Maximum Photometric Flux (lm)
55
60
65
70
75
80
85
90
95
100
105
110
LUXEON 3030 2D Datasheet DS207 20140318 ©2014 Philips Lumileds Lighting Company.
13