BTM410 Datasheet, PDF (6/25 Pages) Laird Tech Smart Technology – modules from Laird are designed to meet the needs of developers who wish to add robust

BTM410/411
Bluetooth^® AT Data Module Datasheet
Categories
Feature
PCM Interface
Implementation
Configurable as master or slave
8 bit A-law
8 bit μ-law
13 bit linear
PCM Clock available when in slave mode
Protocols And
Firmware
Bluetooth Stack
Profiles
Command Interface
Firmware Upgrade
Connection Modes
AT Instructions set
Current Consumption Data Transfer
Supply Voltage
Coexistence/
Compatibility
Connections
Physical
Environmental
Approvals
Miscellaneous
Development Tools
Low Power Sniff Mode
Supply
I/O
USB & UART
WLAN (802.11)
Interface
External Antenna
(BTM410)
Dimensions
Weight
Operating Temperature
Storage Temperature
Bluetooth
FCC
CE & R&TTE
Lead free
Warranty
Development Kit
Version 2.1 compliant. Fully integrated.
GAP (Generic Access Profile)
SDP (Service Discovery Profile)
SPP (Serial Port Profile)
Available over UART
Point to point (cable replacement)
Comprehensive control of connection
and module operation S Registers for
non-volatile storage of parameters
Typically 32 mA
Note: For an Absolute Current Ratings
summary, see Table 2-6.
Less than 2.5mA
3.0 V – 3.3 V DC
1.7 V – 3.3 V DC (independent of Supply)
1.7 V – 3.6 V DC (independent of Supply)
2-wire and 3-wire hardware coexistence
schemes supported
Surface Mount Pads
Pad for 50 Ohm antenna
12.5 mm x 18.0 mm x 3.4 mm BTM410
12.5 mm x 22.0 mm x 3.4 mm BTM411
3 grams
-40° C to +85° C
-40° C to +85° C
Qualified as an Bluetooth End product
Limited Modular Approval (BTM410)
Full Modular Approval (BTM411)
Meets CE and R&TTE requirements
Lead-free and RoHS compliant
1-Year Warranty
Development board and software tools
DVK-BTM410 Dev Kit with BTM410 module
DVK-BTM411 Dev Kit with BTM411 module
Embedded Wireless Solutions
6
Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
Laird Technologies
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]