WL-1500 Datasheet, PDF (2/9 Pages) Laird Tech Smart Technology – Input power must be rated for 230 VAC at 50 or 60 Hz

WL 1500
Liquid Cooling System
User
Manual
Table of contents

Pg No.
1 Description
2
2 Technical Data
3
2.1 Physical Dimensions
3
2.2 Performance Data
3
2.3 Environmental Specifications 3
2.4 Settings
3
3 Operational Settings
4
4 Settings
5
4.1 Maximum Pressure
5
4.2 Maximum Flow Rate
5
5 Maintenance
6
5.1 Heat Exchanger
6
5.2 Water Filter
6
6 Placing Out of Operation
7
7 Spare Parts List and Illustration
8
8 Liquid and Electronic Schematic
9
1  Description
The WL 1500 cooling unit is intended to remove heat from a liquid circuit. The coolant can be either
water or a mixture of water and water-glycol (antifreeze). Water circulates in a closed loop between
the ambient cooling system and a cold plate at the heat source. Heat is removed from the water
by an air-cooled heat exchanger. The capacity of the cooling unit is dependent on the temperature
differential, which is defined as the difference between the ambient temperature and the water outlet
temperature. The cooling unit is designed to remove 1500 W of heat at a temperature differential of
12°C. The maximum forward pressure is limited by a bypass valve. Cooling hoses supplied by user are
connected to threaded nozzle that can accomodate a 9 mm hose ID.
Laird Technologies, Thermal Management Division
www.lairdtech.com
WL 1500
1215.61AE
Page 2 / 9