WL-1500 Datasheet, PDF (1/9 Pages) Laird Tech Smart Technology – Input power must be rated for 230 VAC at 50 or 60 Hz

Innovative Technology
for a Connected World
WL 1500
User Manual
Coolant inlet and outlet are marked with symbols: Inlet: O; Outlet: O
CAUTION: READ MANUAL BEFORE OPERATING COOLING UNIT
– Input power must be rated for 230 VAC at 50 or 60 Hz
– Use water or water/glycol as coolant
– Run cooling unit at correct coolant level, otherwise
cooling capacity will be reduced
– Use cooling hoses that can handle max pressure of liquid circuit
and are resistant to corrosion from coolant
– Never operate cooling unit if it is damaged or leaking
– Before starting any service work on cooling unit, disconnect it from
main power source
global solutions: local support TM
Americas: +1.888.246.9050
Europe: +46.31.704.67.57
Asia: +86.755.2714.1166
Laird Technologies, Thermal Management Division
[e-mail]
www.lairdtech.com/thermal
WL 1500
1215.61AE
Page 1 / 9