5000NT1 Datasheet, PDF (2/2 Pages) Laird Tech Smart Technology – Film base reinforced offers cut through resistant

Tgard™ 5000NT1
Thermally Conductive Insulator
(With Natural Tack)
PROPERTIES
ELECTRICAL PROPERTIES
Dielectric withstand
voltage 50mm probe
for 30 sec
Dielectric breakdown
voltage 50mm probe
Volume resistivity
Dielectric constant
@ 1MHz
MECHANICAL PROPERTIES
Thickness
Hardness
Tensile strength
Elongation along width
or length
Operating temperature
range
Color
UL flammability rating
TEST METHOD
ASTM D149
ASTM D149
ASTM D257
ASTM D257
ASTM D2240
ASTM D412
ASTM D412
UL 94
METRIC VALUES
IMPERIAL VALUES
4,500 volts DC
4,500 volts DC
Avg > 6,000 volts AC
10¹² ohm-cm
3.4
Avg > 6,000 volts AC
10¹² ohm-in
3.4
0.127 mm
75 Shore A
33.1 Mpa
45%
-60℃ to 180℃
Tan
V-0
5 mils
75 Shore A
4.8 Kpsi
45%
-76℉ to 365℉
Tan
V-0
PRESSURE
UNITS
TOTAL THERMAL RESISTANCE
Modified ASTM
D5470
℃-𝑖𝑛²/watt
Modified ASTM
D5470
℃-𝑐𝑚²/watt
T0-220
℃-/watt
10
25
50
100
200
400
(69)
(172) (345) (689) (1379) (2758)
0.62
0.51
0.40
0.27
0.25
0.23
4.00
3.29
2.58
2.06
1.61
1.48
1.31
1.00
0.82
0.65
0.58
0.54
Configurations available: Sheet form, roll form and die-cut parts
Standard options: 17.5” x 18” sheets, 17.5” x 65M, 17.5” x 30M roll or custom configuration
Standard die-cut parts: Standard part sizes for TO-220, TO-247, TO-3P, TO-3PL and TO-264
Custom die-cut parts: Custom configurations available with standard tolerance of 0.5mm (0.020”)
Ability to handle drawings in multiple file formats. (DXF and .DWG preferred)
USA: +1.423.308.1690
Europe: +42.0.4885.7511.1
Asia: +86.022 66298160
www.lairdtech.com
THR-DS-Tgard 5000 1215
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies
materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the
Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird
Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be
the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. Version A01