5000NT1 Datasheet, PDF (1/2 Pages) Laird Tech Smart Technology – Film base reinforced offers cut through resistant

Tgard™ 5000NT1
Thermally Conductive Insulator
(With Natural Tack)
THERMALLY CONDUCTIVE ELECTRICALLY INSULATIVE MATERIAL
Tgard™ 5000NT1 is an excellent dielectric material with good thermal performance consisting of polyimide
film coated with ceramic-filled, high-temperature silicone rubber. The unique natural tack on one side is
specially designed for ease of placement on the component. The inherent tack also enables repositionable after
the initial placement and assembly error minimization.
Tgard™ 5000NT1 is ideal for applications that require a delta temperature across the interface of 2.0ºC-
in²/watt or higher on a TO-220 clip mounted @ 50 psi pressure. Tgard™ 5000NT1 has high dielectric strength
for the AC side of a switching mode power supply. Tgard™ 5000NT1 is tough resulting in an exceptional
cut-through resistant material.
FEATURES AND BENEFITS
 Unique natural tack offers excellent thermal
performance and ease of placement
 Repositionable to reduce assembly error and
increase utilization
 High dielectric breakdown voltage of 6,000 volts
 Film base reinforced offers cut through resistant
 Thermal resistance of 0.40°C-in²/watt @ 50psi
clip pressure
 Thermal resistance of 0.23°C-in²/watt @ 400psi
MARKETS
 Switch mode power supplies for:
- Communications
- Consumer Electronics
- Industrial
- Instrumentation
- Medical
 Electrical power generators
 UPS unit
USA: +1.423.308.1690
Europe: +42.0.4885.7511.1
Asia: +86.022 66298160
www.lairdtech.com
THR-DS-Tgard 5000 1215
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies
materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the
Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird
Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be
the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. Version A01