P0080SAL Datasheet, PDF (9/52 Pages) Littelfuse – gas plasma arresters-package dimensions/specifications

6,'$&WRUŠ 'HYLFHV³3DFNDJH 'LPHQVLRQV
6,'$&WRUŠ 'HYLFHV³3DFNDJH 'LPHQVLRQV
DO-214AA
The DO-214AA package is designed to meet mechanical standards as set forth in JEDEC
publication number 95, except for F and G dimensions.
Case
Temperature
B
D
Measurement
Point
CA
H
E
J
K
0.079
(2.0)
0.110
(2.8)
0.079
(2.0)
Pad Outline
(MM)
F
L
G
Dimensions are in inches
(and millimeters).
Note: A stripe is marked on some parts, to indicate the cathode. IPC-SM-782 recommends 2.4 instead of 2.0.
Dimension
A
B
C
D
E
F
G
H
J
K
L
MIN
0.140
0.205
0.077
0.166
0.036
0.066
0.004
0.077
0.043
0.008
0.027
Inches
MAX
0.155
0.220
0.083
0.180
0.063
0.083
0.008
0.086
0.053
0.012
0.049
Millimeters
MIN
MAX
3.56
3.94
5.21
5.59
1.96
2.11
4.22
4.57
0.91
1.60
1.67
2.11
0.10
0.20
1.95
2.18
1.09
1.35
0.20
0.30
0.69
1.24
Notes:
• Dimensions and tolerances per ASME Y14.5M-1994
• Mold flash shall not exceed 0.13 mm per side.
• Dimensions B and C apply to plated leads.
• All leads are insulated from case. Case is electrically non-conductive. (Rated at 1600 V ac rms for one
minute from leads to case over the operating temperature range)
• Dimension C is measured on the flat section of the lead.
Telecom Design Guide • © 2006 Littelfuse, Inc.
9-9
www.littelfuse.com