Q6016LH651 Datasheet, PDF (6/9 Pages) Littelfuse – 15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs

Teccor^® brand Thyristors
15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Physical Specifications
Terminal Finish
100% Matte Tin-plated
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
Terminal Material Copper Alloy
Design Considerations
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Environmental Specifications
Test
AC Blocking
Temperature Cycling
Temperature/
Humidity
High Temp Storage
Low-Temp Storage
Thermal Shock
Autoclave
Resistance to
Solder Heat
Solderability
Lead Bend
Specifications and Conditions
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell time
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
1008 hours; -40°C
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwell
time at each temperature; 10 sec (max)
transfer time between temperature
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
MIL-STD-750 Method 2031
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead
E
A
MT2
B
C
D
T_C MEASURING POINT
O
P
AREA (REF.) 0.17 IN²
8.13
.320
13.36
.526
7.01
.276
F
R
G
L
H
K
J
MT1 MT2 GATE
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
N
M
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Dimension
A
B
C
D
E
F
G
H
J
K
L
M
N
O
P
R
Inches
Min
Max
0.380
0.420
0.105
0.115
0.230
0.250
0.590
0.620
0.142
0.147
0.110
0.130
0.540
0.575
0.025
0.035
0.195
0.205
0.095
0.105
0.060
0.075
0.085
0.095
0.018
0.024
0.178
0.188
0.045
0.060
0.038
0.048
Millimeters
Min
Max
9.65
10.67
2.66
2.92
5.84
6.35
14.99
15.75
3.61
3.73
2.79
3.30
13.72
14.61
0.64
0.89
4.95
5.21
2.41
2.67
1.52
1.91
2.16
2.41
0.46
0.61
4.52
4.78
1.14
1.52
0.97
1.22
Qxx15xx & Qxx16xHx Series
112
Revised: November 1, 2010 05:04 PM
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.