LSP05G Datasheet, PDF (4/4 Pages) Littelfuse – Surge Protection Module

N/G
G
Surge Protection Module ^{Parallel Connection}
SPD
LED normally on
With LED indicating SPD status
LED Lighting Surge Protection Module > LSP05G ^{- ON (green): SPD is online}
LSP10xxxS
R
- OFF: SPD needs replacement
Application/Installation Schematic
L
L
L
or N
N/G
G
L
AC/DC
N _Power
Supply
+
-
LED Module
Parallel Connection
SPD
LSP05GxxxP
L
L
AC/DC ⁺
N
N _Power
-
Supply
LED Module
G
Parallel Connection
(for Class II Unearthed)
SPD
~X3316
L
L
L
or N
N/G
G
L
AC/DC
N _Power
Supply
+
-
LED Module
L
L
L
or N
N/G
G
Series Connection
SPD
LLSSPP0150GxxxxxxSS
L _AC/DC
N P_Sow_PDer
Supply
+
-
LED Module
L
N
G
Series Connection
(for Class II Unearthed)
SPD
~X3316
L
AC/DC
N _Power
Supply
+
-
LED Module
Parallel Connection
With LED indicating SPD status
- ON (green): SPD is online
- OFF: SPD needs replacement
SPD
LLSSPP0150GxxxxxxSS
LED normally on
R
Notes:
1. Series module used in parallel connection for indication circuit connection.
2. LED indicator and associated circuitry are not included in the module.
3. Black wire is AC line voltage (hot); white wire is AC neutral voltage.
4. Black wire voltage is cut off when SPD needs replacement.
5. R is current limiting resistor; it resistance/wattage is determined by AC line voltage and desired current driving LED. Example: AC line voltage 240V, LED: 1.6mA, resistor:150Kohm/0.5W.
Part Numbering System
L
L
L
or N
N/G
G
L
N _SPD
Littelfuse Surge Protection Module
L+ SP 05G 120 P N H Xxxxx
-
LED Module
Series Connection
5kA (Nominal Discharge Current)
SPD
LSP10xxxS _{Operating Voltage}
P: Parallel connection
S: Series connection
L
L
AC/DC
N
Blank: Wate^NrproPoof wIPe6r6
N: Non-wate_Sr_up_pro_po_lyf
G
Blank: No Hi-Pot withstand capability in
common mode
H: With 1500Vac Hi-Pot withstand
Series Connecctaiopanbility in com_Sm_PDon mode (L-G and N-G)
(for Class II Unearthed)
~X3316
+
-
LED Module
Other Options:
X3333: with GND wire connection, avail-
able for 240Vac and 277Vac rating with
CE Marking for Class I
earthed luminaire installation
Wire Color: Line: Brown, Neutral: Blue,
Ground/P: Green with yellow stripe
X3316: without GND wire connection,
available for 240Vac and 277Vac rating
with CE Marking for Class II
unearthed luminaire installation
Wire Color: Line: Brown, Neutral: Blue
X3379: Input wire length:
110mm +/-10mm,
output wire length: 210mm+/-10mm
Product is CE Marked for Class I earthed
Luminaire installation and Class II
unearthed Luminaire installation (if earth
connection is not utilized).
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/03/16