SP6001-04UTG-1 Datasheet, PDF (2/8 Pages) Littelfuse – SP6001 Lead-Free/Green Series

SPA™ Silicon Protection Array Products
12pF EMI Filter Array with ESD Protection
Absolute Maximum Ratings
Symbol
T
OP
T
STOR
Operating Temperature
Storage Temperature
Parameter
Value
-40 to 85
-60 to 150
Units
°C
°C
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of
the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Thermal Information
Parameter
Storage Temperature Range
Maximum Junction Temperature
Maximum Lead Temperature (Soldering 10s)
Rating
-65 to 150
150
260
Units
°C
°C
°C
Electrical Characteristics (T_OP=25ºC)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Units
Reverse Standoff Voltage
V
RWM
6.0
V
Breakdown Voltage
V_BR
I_R=1mA
7.0
7.8
8.5
V
Reverse Leakage Current
I
-&",
V =5V
RWM
0.1
1.0
μA
Resistance
R_A
I_R=10mA
85
100
115
Ω
Diode Capacitance^1,2
C_D
V_R=2.5V,f=1MHz
12
pF
Line Capacitance^1,2
C
L
V =2.5V,f=1MHz
R
19
24
29
pF
IEC61000-4-2 (Contact Discharge)
±30
kV
ESD Withstand Voltage¹
V
ESD
IEC61000-4-2 (Air Discharge)
±30
kV
Cutoff Frequency³
F_-3dB
Above this frequency, appreciable
attenutation occurs
115
MHz
Notes: ¹ Parameter is guaranteed by design and/or device characterization.
2 _{Total line capacitance is two times the diode capacitance (CD).}
3 _{50Ω source and 50Ω load termination}
SP6001 Lead-Free/Green Series
88
Revised: March 25, 2010
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.