V175LT5CP Datasheet, PDF (10/10 Pages) Littelfuse – Radial Lead Varistors > C-III series

Varistor Products
Radial Lead Varistors > C-III series
Part Numbering System
BASE PART CODES OPTION CODES
(See Ratings & Specifications tables and notes below) (See notes below)
V XXXX LA XX C P XXXXX
For “VARISTOR”
V_M(AC)
(Three or four digits -- 130V to 1,000V)
SERIES + PACKAGING / LEAD STYLE
DESIGNATOR
(See BASE PART CODES notes below)
LA = Bulk Pack / Straight Leads (standard)
LC = Bulk Pack / Crimped and Trimmed Leads
LS = Tape and Reel / Straight Leads
LT = Tape and Reel / Crimped Leads
LU = Tape and Reel / Under-Crimped Leads
RELATIVE ENERGY INDICATOR
(One or Two Digits)
C-III SERIES DESIGNATOR
LEAD-FREE, HALOGEN-FREE AND
RoHS COMPLIANT INDICATOR
See OPTIONS CODES notes below
For standard parts, use the BASE PART designator only.
For parts with non-standard options (such as additional form, packaging
and lead space options), use BASE PART + OPTION CODE.
OPTION CODE items are subject to availability and minimum order
requirements. Please contact a Littelfuse products representative for
additional information or questions
Ordering Notes:
BASE PART CODES:
Series + Packaging / Lead Style Designators:
Ordering examples:
Straight
Lead
Bulk Pack
(standard)
Straight
Lead
Tape & Reel
Crimped &
Trimmed
Lead
Bulk Pack
Under-Crimp
Lead
Tape & Reel
V130LA20CP V130LS20CP V130LC20CP V130LU20CP
Crimped leads are standard on LA Series varistors supplied in
tape and reel, denoted with "LT."
"LC" style is supplied in bulk only.
"LU" style is supplied in tape & reel only.
For crimped leads without trimming and any varitions other than
that described above, please contact Littelfuse.
Packaging and Quantities:
Littelfuse C-III Series varistors are shipped standard in bulk pack
with straight leads and lead spacing outlined in the Package
Dimensions section of this data sheet.
Tape & Reel Quantities:
Device Size
10mm
14mm
20mm
Voltage
ALL
≤ 275V
≥ 275V
≤ 275V
≥ 275V
Quantity Per Reel
"T" Reel "S" Reel "U"Reel
500
500
500
500
500
500
400
400
400
500
500
500
400
400
400
OPTION CODES:
X10: 10MM LEAD SPACING OPTION --
For 10 (-/+1)mm lead spacing (available on 20mm
diameter models only), append standard model
BASE PART number with "X10." Example:
Standard Model
Order As
V130LA20CP V130LA20CPX10
X2855: Nickel Barrier COATED WIRE OPTION --
All standard parts use tinned copper clad steel wire.
Nickel Barrier Coated wire is available as an option,
consisting of Copper wire with a flashing of Nickel
followed by a top coating of Tin. To order append standard
model BASE PART number with "X2855." Example:
Standard Model
Order As
V130LA20CP V130LA20CPX2855
X1347: Hi-Temperature phenolic coating option --
Phenolic Coated C-III Series devices are available with improved
maximum operating maximum temperature of 125°C.
To order, add X1347 to end of part number
(Example: V230LA40CPX1347).
For additional information please refer to the section labeled
"Phenolic Coating Option" on the third page of this document
under the "Electrical Characteristics" table.
C-III Varistor Series
122
Revised: June 5, 2013
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/c-iii.html for current information.