English
Language : 

2016L030_08 Datasheet, PDF (1/5 Pages) Littelfuse – POLYFUSE® Resettable PTCs
POLYFUSE® Resettable PTCs
Surface Mount > 2016L Series
2016L Series
Agency Approvals
AGENCY AGENCY FILE NUMBER
E183209
R50119118
Description
The 2016L Series device provides surface mount
overcurrent protection for low voltage (≤60V) applications
where resettable protection is desired.
Features
t3P)4DPNQMJBOUBOE
lead-free
t'BTUSFTQPOTFUPGBVMU
currents
t)JHIWPMUBHF
t-PXQSPmMF
Applications
t*&&QPSUQSPUFDUJPO
t1 PXFSFEFUIFSOFUQPSU
protection (IEEE 802.3 af)
t"VUPNPUJWFFMFDUSPOJD
control module protection
t-PXWPMUBHFUFMFDPN
equipment protection
Electrical Characteristics
Part Number
Marking
I hold
(A)
I trip
V max
(A) (Vdc)
Maximum Time
I max
(A)
Pd
max.
(W)
To Trip
Current Time
(A)
(Sec.)
Resistance
R min
(Ω)
R typ
(Ω)
R 1max
(Ω)
Agency
Approvals
2016L030
LF030 0.30 0.60 60
20 1.40 1.50
3.00
0.500 1.400 2.300
X
X
2016L050
LF050 0.55 1.10 60
20 1.40 2.50
5.00
0.200 0.700 1.000
X
X
2016L100
LF100 1.10 2.20 15
40 1.40 8.00
0.50
0.100 0.250 0.400
X
X
2016L100/33 LF100-33 1.10 2.20 33
40 1.40 8.00
0.50
0.100 0.250 0.400
X
X
2016L150
LF150 1.50 3.00 15
40 1.40 8.00
1.00
0.070 0.130 0.180
X
X
2016L200
LF200 2.00 4.20
6
40 1.40 8.00
3.00
0.048 0.070 0.100
X
X
I hold = Hold current: maximum current device will pass without tripping in 20°C still air.
I trip = Trip current: minimum current at which the device will trip in 20°C still air.
V max = Maximum voltage device can withstand without damage at rated current (I max)
I max = Maximum fault current device can withstand without damage at rated voltage (Vmax)
P d = Power dissipated from device when in the tripped state at 20°C still air.
R min = Minimum resistance of device in initial (un-soldered) state.
R typ = Typical resistance of device in initial (un-soldered) state.
R 1max = Maximum resistance of device at 20°C measured one hour after tripping or reflow
soldering of 260°C for 20 sec.
Caution: Operation beyond the specified rating may result in damage and possible arcing
and flame.
©2008 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/2016L.html for current information.
Revised: October 24, 2008
2016L Series