LTPL-C034UVH430 Datasheet, PDF (10/16 Pages) Lite-On Technology Corporation – Specific Lighting

8. User Guide
Suggested Reflow Soldering Characteristics
Specific Lighting
LTPL-C034UVH430 Datasheet
Notes:
1. All temperatures refer to topside of the package, measured on the package body surface.
2. The soldering profile could be further referred to different soldering grease material characteristic. The grease
vendor will provide this information.
3. A rapid-rate process is not recommended for the LEDs cooling down from the peak temperature.
4. Although the recommended reflow conditions are specified above, the reflow or hand soldering condition at
the lowest possible temperature is desirable for the LEDs.
5. LiteOn cannot make a guarantee on the LEDs which have been already assembled using the dip soldering
method.
9/15
Part No. : LTPL-C034UVH430
BNS-OD-FC002/A4