LTC1384IG Datasheet, PDF (7/8 Pages) Linear Technology – 5V Low Power RS232 Transceiver with 2 Receivers Active in Shutdown

PACKAGE DESCRIPTIO
7.8 – 8.2
LTC1384
G Package
20-Lead Plastic SSOP (5.3mm)
(Reference LTC DWG # 05-08-1640)
1.25 ±0.12
6.90 – 7.50*
(.272 – .295 )
20 19 18 17 16 15 14 13 12 11
5.3 – 5.7
7.40 – 8.20
(.291 – .323)
0.42 ±0.03
0.65 BSC
RECOMMENDED SOLDER PAD LAYOUT
5.00 – 5.60**
(.197 – .221)
1 2 3 4 5 6 7 8 9 10
2.0
(.079)
0° – 8°
0.09 – 0.25
(.0035 – .010)
0.55 – 0.95
(.022 – .037)
NOTE:
1. CONTROLLING DIMENSION: MILLIMETERS
2.
DIMENSIONS
ARE
IN
MILLIMETERS
(INCHES)
3. DRAWING NOT TO SCALE
*DIMENSIONS DO NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED .152mm (.006") PER SIDE
**DIMENSIONS DO NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED .254mm (.010") PER SIDE
0.65
(.0256)
BSC
0.22 – 0.38
(.009 – .015)
0.05
(.002)
G20 SSOP 0802
N Package
18-Lead PDIP (Narrow .300 Inch)
(Reference LTC DWG # 05-08-1510)
.900*
(22.860)
MAX
18 17 16 15 14 13 12 11 10
.255 ± .015*
(6.477 ± 0.381)
.300 – .325
(7.620 – 8.255)
12 34 5 6 78 9
.130 ± .005
(3.302 ± 0.127)
.045 – .065
(1.143 – 1.651)
.008 – .015
(0.203 – 0.381)
.020
(0.508)
MIN
+.035
.325 _–.015
( ) ^8.255
+0.889
–0.381
.120
(3.048)
MIN
.005
(0.127)
MIN
NOTE:
1. DIMENSIONS
ARE
INCHES
MILLIMETERS
*THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .010 INCH (0.254mm)
.100
(2.54)
BSC
.065
(1.651)
TYP
.018 ± .003
(0.457 ± 0.076)
N18 1002
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no represen-
tation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
1384fa
7