LTC4010_15 Datasheet, PDF (24/24 Pages) Linear Technology – High Efficiency Standalone Nickel Battery Charger

LTC4010
Related Parts
PART NUMBER
LT^®1510
LT1511
DESCRIPTION
Constant-Voltage/Constant-Current Battery Charger
3A Constant-Voltage/Constant-Current Battery Charger
LT1513
LTC1760
SEPIC Constant- or Programmable-Current/Constant-
Voltage Battery Charger
Smart Battery System Manager
LTC1960
Dual Battery Charger/Selector with SPI
LTC4008
High Efficiency, Programmable Voltage/Current Battery
Charger
LTC4011
High Efficiency Standalone Nickel Battery Charger
LTC4060
Standalone Linear NiMH/NiCd Fast Charger
LTC4100
Smart Battery Charger Controller
LTC4150
LTC4412
Coulomb Counter/Battery Gas Gauge
Low Loss PowerPath Controller
LTC4412HV
36V, Low Loss PowerPath Controller in ThinSOT
LTC4413
Dual, 2.6A Ideal Diode in 3mm × 3mm DFN
LTC4414
36V, Low Loss PowerPath Controller for Large PFETs
PowerPath is a trademark of Linear Technology Corporation.
COMMENTS
Up to 1.5A Charge Current for Li-Ion, NiCd and NiMH Batteries
High Efficiency, Minimum External Components to Fast Charge
Lithium, NiMH and NiCd Batteries
Charger Input Voltage May be Higher, Equal to or Lower than
Battery Voltage, 500kHz Switching Frequency
Autonomous Power Management and Battery Charging for
Two Smart Batteries, SMBus Rev 1.1 Compliant
11-Bit V-DAC, 0.8% Voltage Accuracy, 10-Bit I-DAC,
5% Current Accuracy
Constant-Current/Constant-Voltage Switching Regulator, Resistor
Voltage/Current Programming, AC Adapter Current Limit and
Thermistor Sensor and Indicator Outputs
Complete NiMH/NiCd Charger in a 20-Pin TSSOP Package,
PowerPath^TM Control, Constant-Current Switching Regulator
Complete NiMH/NiCd Charger in a Small Leaded or Leadless
16-Pin Package, No Sense Resistor or Blocking Diode Required
Level 2 Charger Operates with or without MCU Host,
SMBus Rev. 1.1 Compliant
High Side Sense of Charge Quantity and Polarity in a 10-Pin MSOP
Very Low Loss Replacement for Power Supply ORing Diodes
Using Minimal External Components, V_IN(MAX) = 28V
Very Low Loss Replacement for Power Supply ORing Diodes,
V_IN(MAX) = 36V
2.5V ≤ V_IN ≤ 5.5V, Ideal Diode ORing or Load Sharing,
Low Reverse Leakage Current
Higher Gate Drive for Larger Q_G PFETs, V_IN(MAX) = 36V,
8-Pin MSOP Package
24 Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
[phone] ^● FAX: [phone] ^● www.linear.com
4010fb
LT 0110 REV B • PRINTED IN USA
 LINEAR TECHNOLOGY CORPORATION 2005