LTC3565_1 Datasheet, PDF (20/22 Pages) Linear Technology – 1.25A, 4MHz, Synchronous Step-Down DC/DC Converter

LTC3565
Package Description
DD Package
10-Lead Plastic DFN (3mm × 3mm)
(Reference LTC DWG # 05-08-1699 Rev B)
0.70 p0.05
R = 0.125
TYP
6
0.40 p 0.10
10
3.55 p0.05
1.65 p0.05
2.15 p0.05 (2 SIDES)
3.00 p0.10 1.65 p 0.10
(4 SIDES) (2 SIDES)
PACKAGE
OUTLINE
PIN 1
TOP MARK
(SEE NOTE 6)
0.25 p 0.05
0.50
BSC
2.38 p0.05
(2 SIDES)
RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS
0.200 REF
0.75 p0.05
0.00 – 0.05
(DD) DFN REV B 0309
5
1
0.25 p 0.05
0.50 BSC
2.38 p0.10
(2 SIDES)
BOTTOM VIEW—EXPOSED PAD
NOTE:
1. DRAWING TO BE MADE A JEDEC PACKAGE OUTLINE M0-229 VARIATION OF (WEED-2).
CHECK THE LTC WEBSITE DATA SHEET FOR CURRENT STATUS OF VARIATION ASSIGNMENT
2. DRAWING NOT TO SCALE
3. ALL DIMENSIONS ARE IN MILLIMETERS
4. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE
MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.15mm ON ANY SIDE
5. EXPOSED PAD SHALL BE SOLDER PLATED
6. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION ON THE
TOP AND BOTTOM OF PACKAGE
MSE Package
10-Lead Plastic MSOP, Exposed Die Pad
(Reference LTC DWG # 05-08-1664 Rev C)
2.794 p 0.102
(.110 p .004)
0.889 p 0.127
(.035 p .005)
3.00 p 0.102
(.118 p .004)
(NOTE 3)
10 9 8 7 6
0.497 p 0.076
(.0196 p .003)
REF
BOTTOM VIEW OF
EXPOSED PAD OPTION
2.06 p 0.102
1
(.081 p .004)
1.83 p 0.102
0.29
REF
(.072 p .004)
5.23
(.206)
MIN
2.083 p 0.102 3.20 – 3.45
(.082 p .004) (.126 – .136)
0.254
(.010)
DETAIL “A”
0o – 6o TYP
4.90 p 0.152
(.193 p .006)
3.00 p 0.102
(.118 p .004)
(NOTE 4)
0.305 p 0.038
(.0120 p .0015)
TYP
0.50
(.0197)
BSC
RECOMMENDED SOLDER PAD LAYOUT
GAUGE PLANE
12345
10
0.53 p 0.152
(.021 p .006)
DETAIL “A”
1.10
(.043)
MAX
0.86
(.034)
REF
0.18
(.007)
SEATING
NOTE:
1. DIMENSIONS IN MILLIMETER/(INCH)
PLANE
0.17 – 0.27
(.007 – .011)
TYP
0.50
(.0197)
BSC
0.1016 p 0.0508
(.004 p .002)
MSOP (MSE) 0908 REV C
2. DRAWING NOT TO SCALE
3. DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.
MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
4. DIMENSION DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSIONS.
INTERLEAD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
5. LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING) SHALL BE 0.102mm (.004") MAX
0.05 REF
DETAIL “B”
CORNER TAIL IS PART OF
DETAIL “B” THE LEADFRAME FEATURE.
FOR REFERENCE ONLY
NO MEASUREMENT PURPOSE
3565fa
20