LTC3421_15 Datasheet, PDF (15/16 Pages) Linear Technology – 3A, 3MHz Micropower Synchronous Boost Converter with Output Disconnect

PACKAGE DESCRIPTIO
UF Package
24-Lead Plastic QFN (4mm × 4mm)
(Reference LTC DWG # 05-08-1697)
0.70 ±0.05
LTC3421
4.50 ± 0.05
2.45 ± 0.05
3.10 ± 0.05 ^{(4 SIDES)}
PACKAGE OUTLINE
0.25 ±0.05
0.50 BSC
RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS
4.00 ± 0.10
(4 SIDES)
PIN 1
TOP MARK
(NOTE 5)
0.75 ± 0.05
2.45 ± 0.10
(4-SIDES)
BOTTOM VIEW—EXPOSED PAD
R = 0.115
TYP
0.23 TYP
(4 SIDES)
23 24
0.38 ± 0.10
1
2
(UF24) QFN 0603
0.200 REF
0.25 ± 0.05
0.00 – 0.05
0.50 BSC
NOTE:
1. DRAWING PROPOSED TO BE MADE A JEDEC PACKAGE OUTLINE MO-220 VARIATION (WGGD-X)—TO BE APPROVED
2. ALL DIMENSIONS ARE IN MILLIMETERS
3. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE
MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.15mm ON ANY SIDE, IF PRESENT
4. EXPOSED PAD SHALL BE SOLDER PLATED
5. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION
ON THE TOP AND BOTTOM OF PACKAGE
6. DRAWING NOT TO SCALE
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no represen-
tation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
3421f
15