|
LTC2444 Datasheet, PDF (1/28 Pages) Linear Technology – 24-Bit High Speed 8-/16-Channel ADCs with Selectable Speed/Resolution | |||
|
LTC2444/LTC2445/
LTC2448/LTC2449
24-Bit High Speed
8-/16-Channel âΣ ADCs with
Selectable Speed/Resolution
FEATURES
â Up to 8 Differential or 16 Single-Ended Input
Channels
â Up to 8kHz Output Rate
â Up to 4kHz Multiplexing Rate
â Selectable Speed/Resolution
â 2µVRMS Noise at 1.76kHz Output Rate
â 200nVRMS Noise at 13.8Hz Output Rate with
Simultaneous 50/60Hz Rejection
â Guaranteed Modulator Stability and Lock-Up
Immunity for any Input and Reference Conditions
â 0.0005% INL, No Missing Codes
â Autosleep Enables 20µA Operation at 6.9Hz
â < 5µV Offset (4.5V < VCC < 5.5V, â 40°C to 85°C)
â Differential Input and Differential Reference with
GND to VCC Common Mode Range
â No Latency Mode, Each Conversion is Accurate Even
After a New Channel is Selected
â Internal OscillatorâNo External Components
â LTC2445/LTC2449 Include MUXOUT/ADCIN for
External Buffering or Gain
â Tiny QFN 5mm xU7mm Package
APPLICATIO S
â High Speed Multiplexing
â Weight Scales
â Auto Ranging 6-Digit DVMs
â Direct Temperature Measurement
â High Speed Data Acquisition
DESCRIPTIO
The LTC®2444/LTC2445/LTC2448/LTC2449 are 8-/16-
channel (4-/8-differential) high speed 24-bit No Latency
âΣTM ADCs. They use a proprietary delta-sigma architec-
ture enabling variable speed/resolution. Through a simple
4-wire serial interface, ten speed/resolution combinations
6.9Hz/280nVRMS to 3.5kHz/25µVRMS (4kHz with external
oscillator) can be selected with no latency between con-
version results or shift in DC accuracy (offset, full-scale,
linearity, drift). Additionally, a 2X speed mode can be
selected enabling output rates up to 7kHz (8kHz if an
external oscillator is used) with one cycle latency.
Any combination of single-ended or differential inputs can
be selected with a common mode input range from ground
to VCC, independent of VREF. While operating in the 1X
speed mode the first conversion following a new speed,
resolution, or channel selection is valid. Since there is no
settling time between conversions, all 8 differential chan-
nels can be scanned at a rate of 500Hz. At the conclusion
of each conversion, the converter is internally reset elimi-
nating any memory effects between successive conver-
sions and assuring stability of the high order delta-sigma
modulator.
, LTC and LT are registered trademarks of Linear Technology Corporation.
No Latency âΣ is a trademark of Linear Technology Corporation.
TYPICAL APPLICATIO
THERMOCOUPLE
Simple 24-Bit Variable Speed Data Acquisition System
4.5V TO 5.5V
CH0
CH1
â¢
â¢
â¢
CH7
CH8
â¢
â¢
â¢
CH15
COM
16-CHANNEL
MUX
REF+ VCC
FO
+
VARIABLE SPEED/
RESOLUTION
SDI
SCK
â DIFFERENTIAL
SDO
24-BIT âΣ ADC
CS
1µF
= EXTERNAL OSCILLATOR
= INTERNAL OSCILLATOR
(SIMULTANEOUS 50Hz/60Hz
REJECTION AT 6.9Hz OUTPUT RATE)
4-WIRE
SPI INTERFACE
REF â
GND
LTC2448
2444 TA01
LTC2444/LTC2448
Speed vs RMS Noise
100
VCC = 5V
VVRINE+F
=
=
5V
VINâ
=
0V
2X SPEED MODE
NO LATENCY MODE
10
2.8µV AT 880Hz
280nV AT 6.9Hz
1 (50/60Hz REJECTION)
0.1
1
10
100
1000
CONVERSION RATE (Hz)
10000
2440 TA02
sn2444589 2444589fs
1
|
▷ |