LTC1480_15 Datasheet, PDF (1/8 Pages) Linear Technology – 3.3V Ultralow Power RS485 Transceiver

LTC1480
3.3V Ultralow Power
RS485 Transceiver
FEATURES
■ _{True RS485 from a Single 3.3V Supply}
■ _{Low Power: ICC = 500µA Max with Driver Disabled}
■ _{ICC = 600µA Max with Driver Enabled, No Load}
■ _{1µA Quiescent in Shutdown Mode}
■ _{–7V to 12V Common Mode Range Permits ±7V}
Ground Difference Between Devices on the Data Line
■ _{Thermal Shutdown Protection}
■ _{Power Up/Down Glitch-Free Driver Outputs Permit}
Live Insertion or Removal of Transceiver
■ _{Driver Maintains High Impedance in Three-State or}
with the Power Off
■ _{Up to 32 Transceivers on the Bus}
■ _{50ns Typical Driver Propagation Delays with}
10ns Skew
■ _{Pin Compatible with the LTC485}
■ _{Available in 8-Lead DIP and SO Packages}
U
APPLICATIO S
■ _{Battery-Powered RS485/RS422 Applications}
■ _{Low Power RS485/RS422 Transceiver}
■ _{Level Translator}
DESCRIPTIO
The LTC^®1480 is an ultralow power differential line trans-
ceiver which provides full RS485 compatibility while oper-
ating from a single 3.3V supply. It is designed for data
transmission standard RS485 applications with extended
common mode range (12V to –7V). It also meets the
requirements of RS422 and features high speed operation
up to 2.5Mb/s. The CMOS design offers significant power
savings without sacrificing ruggedness against overload
or ESD damage. Typical quiescent current is only 300µA
while operating and 1µA in shutdown.
The driver and receiver feature three-state outputs, with
the driver outputs maintaining high impedance over the
entire common mode range. Excessive power dissipation
caused by bus contention or faults is prevented by a
thermal shutdown circuit which forces the driver outputs
into a high impedance state. The receiver has a fail-safe
feature which guarantees a high output state when the
inputs are left open.
The LTC1480 is fully specified over the commercial and
extended industrial temperature range. The LTC1480 is
available in 8-pin SO and DIP packages.
, LTC and LT are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
TYPICAL APPLICATIO
3.3V
LTC1480
RO
R
RE
DE
DI
D
B
120Ω
A
3.3V RS485 Network
SHIELD
SHIELD
3.3V _{B A}
3.3V
LTC1480
B
120Ω
A
R
RO
RE
DE
D
DI
R
LTC1480
D
RO RE DE DI
1480 TA01
Driver Differential
Output Voltage vs Output Current
3.5
V_CC = 3.3V
3.0
T_A = 25°C
2.5
2.0
1.5
1.0
0.5
0
0 10 20 30 40 50 60 70 80 90
OUTPUT CURRENT (mA)
1480 TA02
1480fa
1