LT1013_1 Datasheet, PDF (1/24 Pages) Linear Technology – Quad Precision Op Amp (LT1014) Dual Precision Op Amp (LT1013)

LT1013/LT1014
Quad Precision Op Amp (LT1014)
Dual Precision Op Amp (LT1013)
FEATURES
DESCRIPTIO
■ _{Single Supply Operation}
Input Voltage Range Extends to Ground
Output Swings to Ground while Sinking Current
■ _{Pin Compatible to 1458 and 324 with Precision Specs}
■ _{Guaranteed Offset Voltage: 150μV Max}
■ _{Guaranteed Low Drift: 2μV/°C Max}
■ _{Guaranteed Offset Current: 0.8nA Max}
■ _{Guaranteed High Gain}
5mA Load Current: 1.5 Million Min
17mA Load Current: 0.8 Million Min
■ _{Guaranteed Low Supply Current: 500μA Max}
■ _{Low Voltage Noise, 0.1Hz to 10Hz: 0.55μVp-p}
■ _{Low Current Noise—Better than 0P-07, 0.07pA/√Hz}
U
APPLICATIO S
■ _{Battery-Powered Precision Instrumentation}
Strain Gauge Signal Conditioners
Thermocouple Amplifiers
Instrumentation Amplifiers
■ _{4mA–20mA Current Loop Transmitters}
■ _{Multiple Limit Threshold Detection}
■ _{Active Filters}
■ _{Multiple Gain Blocks}
, LT, LTC and LTM are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
TheLT ^®1014isthefirstprecisionquadoperationalamplifier
which directly upgrades designs in the industry standard
14-pin DIP LM324/LM348/OP-11/4156 pin configuration.
It is no longer necessary to compromise specifications,
while saving board space and cost, as compared to single
operational amplifiers.
The LT1014’s low offset voltage of 50μV, drift of 0.3μV/°C,
offset current of 0.15nA, gain of 8 million, common mode
rejection of 117dB and power supply rejection of 120dB
qualify it as four truly precision operational amplifiers.
Particularly important is the low offset voltage, since no
offset null terminals are provided in the quad configura-
tion. Although supply current is only 350μA per amplifier,
a new output stage design sources and sinks in excess of
20mA of load current, while retaining high voltage gain.
Similarly, the LT1013 is the first precision dual op amp in
the 8-pin industry standard configuration, upgrading the
performance of such popular devices as the MC1458/
1558, LM158 and OP-221. The LT1013’s specifications
are similar to (even somewhat better than) the LT1014’s.
Both the LT1013 and LT1014 can be operated off a single
5V power supply: input common mode range includes
ground; the output can also swing to within a few millivolts
of ground. Crossover distortion, so apparent on previous
single-supply designs, is eliminated. A full set of specifi-
cations is provided with ±15V and single 5V supplies.
TYPICAL APPLICATIO
3 Channel Thermocouple Thermometer
4k
3k
299k
+5V
LT1004
1.2V
12
1684Ω
YSI 44007
5kΩ
AT 25°C
14
LT1014
13
260Ω 1.8k
1M
+5V
2– 4
LT1014
3+
1 OUTPUT A
10mV/°C
11
1M
4k
USE TYPE K THERMOCOUPLES. ALL RESISTORS = 1% FILM.
COLD JUNCTION COMPENSATION ACCURATE
TO ±1°C FROM 0°C 60°C.
USE 4TH AMPLIFIER FOR OUTPUT C.
6–
LT1014
5+
7 OUTPUT B
10mV/°C
LT1014 Distribution of Offset Voltage
700
V_S = ±15V
600
T_A = 25°C
425 LT1014s
(1700 OP AMPS)
500 _{TESTED FROM}
THREE RUNS
400 ^{J PACKAGE}
300
200
100
0
–300 –200 –100 0
100 200 300
INPUT OFFSET VOLTAGE (μV)
1013/14 TA02
10134fc
1