English
Language : 

3N163_14 Datasheet, PDF (2/2 Pages) Linear Integrated Systems – P-CHANNEL ENHANCEMENT MODE MOSFET
SWITCHING CHARACTERISTICS TA=25°C and VBS=0 (unless otherwise noted)
SYMBOL CHARACTERISTIC
3N163
3N164 UNITS CONDITIONS
MIN MAX MIN MAX
ton
Turn-On Delay Time
tr
Rise Time
12
12 ns VDD=-15V, VSB=0V
24
24
ID(on)=-10mA1
toff
Turn-Off Time
50
50
RG=RL=1.4K
TYPICAL SWITCHING WAVEFORM
INPUT PULSE
Rise Time≤2ns
Pulse Width≥200ns
Switching Times Test Circuit
SAMPLING SCOPE
Tr≤0.2ns
CIN≤2pF
RIN≥10M
NOTES:
1. For design reference only, not 100% tested.
2. Derate 3mW/ºC above 25ºC
3. Derate 3.5mW/ºC above 25ºC
4. All min/max limits are absolute numbers. Negative signs indicate electrical polarity only.
Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions above those indicated in the operational sections of the
specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Information furnished by Linear Integrated Systems is believed to be accurate and reliable. However, no responsibility is assumed for its
use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Linear Integrated Systems.
Linear Integrated Systems (LIS) is a 25-year-old, third-generation precision semiconductor company providing high-quality
discrete components. Expertise brought to LIS is based on processes and products developed at Amelco, Union Carbide, Intersil
and Micro Power Systems by company President John H. Hall. Hall, a protégé of Silicon Valley legend Dr. Jean Hoerni, was the
director of IC Development at Union Carbide, Co-Founder and Vice President of R&D at Intersil, and Founder/President of Micro
Power Systems.
Linear Integrated Systems
• 4042 Clipper Court • Fremont, CA 94538 • Tel: 510 490-9160 • Fax: 510 353-0261
Doc 201137 09/02/2014 Rev#A8 ECN# 3N163 3N164