EQW006A0B Datasheet, PDF (5/19 Pages) Lineage Power Corporation – 36 - 75Vdc Input; 12Vdc Output; 6A Output Current

Data Sheet
March 26, 2008
EQW006 Series, Eight Brick Power Modules: DC-DC Converter
36 – 75Vdc Input; 12Vdc Output; 6A Output Current
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions. See Feature Descriptions for additional information.
Parameter
Device Symbol Min
Typ
Max
Unit
Remote On/Off Signal Interface
(V_IN=V_{IN, min} to V_{IN, max} ; open collector or equivalent,
Signal referenced to V_IN- terminal)
Negative Logic: device code suffix “1”
Logic Low = module On, Logic High = module Off
Positive Logic: No device code suffix required
Logic Low = module Off, Logic High = module On
Logic Low - Remote On/Off Current
All
I_on/off
⎯
0.15
1.0
mA
Logic Low - On/Off Voltage
All
V_on/off
-0.7
⎯
1.2
V
Logic High Voltage – (Typ = Open Collector)
All
V_on/off
⎯
Logic High maximum allowable leakage current
All
I_on/off
⎯
⎯
Turn-On Delay and Rise Times
(I_O=I_{O, max ,} V_IN=V_{IN, nom,} T_A = 25 ^oC)
Case 1: On/Off input is set to Logic Low (Module
ON) and then input power is applied (delay from
instant at which V_IN = V_{IN, min} until Vo=10% of Vo,set)
All
Tdelay
―
20
Case 2: Input power is applied for at least 1 second
and then the On/Off input is set from OFF to ON (T_delay =
All
Tdelay
―
12
from instant at which V_IN=V_{IN, min} until V_O = 10% of V_{O, set}).
Output voltage Rise time (time for Vo to rise from 10%
of V_o,set to 90% of V_{o, set})
All
Trise
―
5
Output voltage overshoot – Startup
―
I_O= 80% of I_{O, max}; V_IN=V_{IN, min} to V_{IN, max}, T_A = 25 ^oC
Remote Sense Range
Over temperature Protection
Output Overvoltage Protection
Input Undervoltage Lockout
All
V_SENSE
All
T_ref
⎯
120
All
V_{O, limit}
13.8
⎯
Turn-on Threshold
All
V_UVLO
―
32
Turn-off Threshold
25
27
15
V
10
μA
―
msec
―
msec
―
msec
5
% V_{O, set}
0.5
Vdc
⎯
°C
15
V
36
V
―
V
LINEAGE POWER
5