|
JNC350R41TZ Datasheet, PDF (3/16 Pages) Lineage Power Corporation – Compliant to RoHS EU Directive 2002/95/EC (-Zversions) | |||
|
◁ |
Data Sheet
August 9, 2010
JNC350R Power Modules; DC-DC Converters
18 â 36 Vdc Input; 28Vdc Output; 350W Output
Electrical Specifications (continued)
Parameter
Output Voltage Set-point
(VIN=VIN,nom, IO=IO, max, Tc =25°C)
Output Voltage1
(Over all operating input voltage, resistive load,
and temperature conditions until end of life)
Device
All
All
Symbol
VO, set
VO
Min
27.5
27.15
Typ
Max
28
28.5
ï¾
28.85
Unit
Vdc
Vdc
Output Regulation
Line (VIN=VIN, min to VIN, max)
All
Load (IO=IO, min to IO, max)1
All
Temperature (Tc = -40ºC to +100ºC)
All
Output Ripple and Noise on nominal output
ï¾
0.1
0.2
%Vo,set
ï¾
0.1
0.2
%Vo,set
ï¾
0.5
1.5
%Vo,set
(VIN=VIN, nom and IO=IO, min to IO, max)
RMS (5Hz to 20MHz bandwidth)
All
Peak-to-Peak (5Hz to 20MHz bandwidth)2
All
External Capacitance (ESR > 50 mâ¦)3
All, except
-T
CO
Without the Tunable Loop⢠(ESRMAX = 80mâ¦)3
-T
CO
With the Tunable Loop⢠(ESR > 50 mâ¦)4
-T
CO
Output Current2
All
Io
ï¾
45
55
mVrms
ï¾
80
200
mVpk-pk
440
6500
μF
440
470
μF
440
8,000
μF
0
12.5
Adc
Output Current Limit Inception
All
IO, lim
13.1
ï¾
17.5
Adc
Output Short Circuit Current (VO⤠0.25Vdc)
All
IO, sc
30
Arms
Efficiency
VIN=VIN, nom, Tc=25°C IO=IO, max , VO= VO,set
All
η
ï¾
91
ï¾
%
Switching Frequency
fsw
ï¾
300
ï¾
kHz
Dynamic Load Response
(ïIo/ït=1A/10ïs; Vin=Vin,nom; Tc=25°C; Tested
with a 470 μF aluminum and a 10 µF ceramic
capacitor across the load.)
Load Change from Io= 50% to 75% of Io,max:
Peak Deviation
All
Settling Time (Vo<10% peak deviation)
Vpk
ts
ï¾
2
ï¾
%VO, set
ï¾
1.5
ï¾
ms
Load Change from Io= 25% to 50% of Io,max:
Peak Deviation
Settling Time (Vo<10% peak deviation)
Vpk
ï¾
2
ï¾
%VO, set
ts
ï¾
1.5
ï¾
ms
1. For Vin ⤠19V, and case temperatures ⥠85°C, output voltage regulation is relaxed to -2.5%Vo,set.
2. When operating at output current between 0Adc and 1Adc, output ripple may exceed maximum pk-pk limits.
3. Use a minimum 2 x 220uF output capacitor. Recommended capacitor is Nichicon CD series, 220uF/35V. If the ambient
temperature is less than 0°C, use 3x of the minimum CO.
4. External capacitors may require using the new Tunable Loop⢠feature to ensure that the module is stable as well as getting the
best transient response. See the Tunable Loop⢠section for details.
Isolation Specifications
Parameter
Isolation Capacitance
Isolation Resistance
Symbol
Min
Typ
Max
Unit
Ciso
ï¾
15
ï¾
nF
Riso
10
ï¾
ï¾
Mâ¦
General Specifications
Parameter
Calculated Reliability based upon Telcordia SR-
332 Issue 2: Method I Case 3 (IO=80%IO, max,
TA=40°C, airflow = 200 lfm, 90% confidence)
Device
All
Symbol
FIT
MTBF
Weight
All
LINEAGE POWER
Min
Typ
Max
Unit
341.8
109/Hours
2,925,365
ï¾
78
ï¾
2.8
Hours
g
oz.
3
|
▷ |