JNC350R41TZ Datasheet, PDF (1/16 Pages) Lineage Power Corporation – Compliant to RoHS EU Directive 2002/95/EC (-Zversions)

Data Sheet
August 9, 2010
JNC350R Series Power Modules; DC-DC Converters
18-36 Vdc Input; 28Vdc Output; 350W Output
RoHS Compliant
Applications
 RF Power Amplifier
 Wireless Networks
 Switching Networks
Options
 Auto-restart after either output OCP or OVP
fault shutdown (“3” option code)
 Auto-restart only after output OCP fault
shutdown (“4” option code)
 Shorter pins (“6” or “8” option code)
 Unthreaded heatsink holes (-18 option code)
 Tunable Loop™ for transient response
optimization (-T option code)
Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
 Compliant to IPC-9592, Class II, Category 2
 High power density: 129 W/in3
 Industry standard half-brick pin-out
 Industry standard half-brick footprint
57.7mm x 60.7mm x 12.7mm
(2.27” x 2.39” x 0.5”)
 2:1 input voltage range
 Low output ripple and noise
 Constant switching frequency
 Single tightly regulated output
 No minimum load required
 Remote Sense
 Output voltage adjustment trim, 16.8Vdc to 32.0Vdc
 Accepts transient overloads without shutdown
 Latch after output OVP/OCP fault shutdown
 Over temperature protection auto restart
 Wide operating case temperature range (-40°C to
100°C)
 CE mark meets 2006/95/EC directives§
 UL60950-1/CSA† C22.2 No. 60950-1-03 Certified
(CCSAUS) and VDE‡ 0805:2001-12 (EN60950-1)
Licensed
 ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
The JNC350R series of dc-dc converters are a new generation of isolated DC/DC power modules providing up to
350W output power in an industry standard half-brick size footprint, which makes it an ideal choice for high voltage
and high power applications. Threaded-through holes are provided to allow easy mounting or addition of a heat sink
for high-temperature applications. The output is fully isolated from the input, allowing versatile polarity configurations
and grounding connections. This module contains an optional new feature, the Tunable Loop^TM, which allows the
user to optimize the dynamic response of the converter to match the load with reduced amount of output
capacitance, leading to savings on cost and PWB area.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† _{CSA is a registered trademark of Canadian Standards Association.}
‡ _{VDE is a trademark of Verband Deutscher Elektrotechniker e.V.}
** ISO is a registered trademark of the International Organization of Standards
Document No: DS10-002 ver 1.01
PDF name: JNC350R.pdf
: