APXH006A0X-SRZ Datasheet, PDF (3/23 Pages) Lineage Power Corporation – 2.4 - 5.5Vdc input; 0.6Vdc to 3.63Vdc output; 6A output current

Data Sheet
May 20, 2009
Pico TLynx^TM 6A: Non-isolated DC-DC Power Modules
2.4 – 5.5Vdc input; 0.6Vdc to 3.63Vdc output; 6A output current
Electrical Specifications (continued)
Parameter
Device
Symbol
Min
Output Voltage Set-point (with 0.5% tolerance for
external resistor used to set output voltage)
All
VO, set
-1.5
Output Voltage
All
(Over all operating input voltage, resistive load,
and temperature conditions until end of life)
Adjustment Range
All
Selected by an external resistor
Output Regulation (for VO ≥ 2.5Vdc)
Line (VIN=VIN, min to VIN, max)
All
Load (IO=IO, min to IO, max)
All
Output Regulation (for VO < 2.5Vdc)
Line (VIN=VIN, min to VIN, max)
All
Load (IO=IO, min to IO, max)
All
Temperature (Tref=TA, min to TA, max)
All
VO, set
VO
-3.0
0.6
Remote Sense Range
All
Output Ripple and Noise on nominal output
(VIN=VIN, nom and IO=IO, min to IO, max Co = 0.1μF //
10 μF ceramic capacitors)
Peak-to-Peak (5Hz to 20MHz bandwidth)
All
⎯
RMS (5Hz to 20MHz bandwidth)
External Capacitance¹
Without the Tunable Loop^TM
ESR ≥ 1 mΩ
With the Tunable Loop^TM
All
CO, max
0
ESR ≥ 0.15 mΩ
ESR ≥ 10 mΩ
Output Current
All
CO, max
0
All
CO, max
0
All
Io
0
Output Current Limit Inception (Hiccup Mode )
All
IO, lim
Output Short-Circuit Current
All
IO, s/c
(VO≤250mV) ( Hiccup Mode )
Efficiency
VIN= 3.3Vdc, TA=25°C
IO=IO, max , VO= VO,set
VIN= 5Vdc
VO,set = 0.6Vdc
η
VO, set = 1.2Vdc
η
VO,set = 1.8Vdc
η
VO,set = 2.5Vdc
η
VO,set = 3.3Vdc
η
Switching Frequency
All
fsw
⎯
Dynamic Load Response
(dIo/dt=10A/μs; VIN = 5V; Vout = 1.8V, TA=25°C)
Load Change from Io= 0% to 50% of Io,max;
Co = 0
Peak Deviation
Settling Time (Vo<10% peak deviation)
All
Vpk
All
ts
Load Change from Io= 50% to 0% of Io,max:
Co = 0
Peak Deviation
All
Vpk
Settling Time (Vo<10% peak deviation)
All
ts
Typ
⎯
⎯
⎯
⎯
⎯
⎯
25
10
⎯
⎯
0.23
72.3
82.7
87.7
91.4
93.0
600
180
20
170
20
Max
+1.5
+3.0
Unit
% VO, set
% VO, set
3.63
Vdc
+0.4
10
10
5
0.4
0.5
% VO, set
mV
mV
mV
% VO, set
Vdc
35
mVpk-pk
15
mVrms
47
1000
3000
6
200
⎯
μF
μF
μF
Adc
% Io,max
Adc
%
%
%
%
%
kHz
mV
μs
mV
μs
1 _{External capacitors may require using the new Tunable Loop}TM _{feature to ensure that the module is stable as well as}
getting the best transient response. See the Tunable Loop^TM section for details.
LINEAGE POWER
3