English
Language : 

APXH003A0X-SRZ_0910 Datasheet, PDF (3/23 Pages) Lineage Power Corporation – Pico TLynxTM 3A: Non-Isolated DC-DC Power Modules
Data Sheet
October 8, 2009
Pico TLynxTM 3A: Non-isolated DC-DC Power Modules
2.4 – 5.5Vdc input; 0.6Vdc to 3.63Vdc output; 3A output current
Electrical Specifications (continued)
Parameter
Device
Symbol
Min
Output Voltage Set-point (with 0.5% tolerance for
external resistor used to set output voltage)
All
VO, set
-1.5
Output Voltage
All
VO, set
-3.0
(Over all operating input voltage, resistive load,
and temperature conditions until end of life)
Adjustment Range
Selected by an external resistor
All
VO
0.6
Output Regulation (for VO ≥ 2.5Vdc)
Line (VIN=VIN, min to VIN, max)
All
Load (IO=IO, min to IO, max)
All
Output Regulation (for VO < 2.5Vdc)
Line (VIN=VIN, min to VIN, max)
All
Load (IO=IO, min to IO, max)
All
Temperature (Tref=TA, min to TA, max)
All
Remote Sense Range
All
Output Ripple and Noise on nominal output
(VIN=VIN, nom and IO=IO, min to IO, max Co = 0.1μF //
10 μF ceramic capacitors)
Peak-to-Peak (5Hz to 20MHz bandwidth)
All
⎯
RMS
External Capacitance1
Without the Tunable LoopTM
ESR ≥ 1 mΩ
With the Tunable LoopTM
All
CO, max
0
ESR ≥ 0.15 mΩ
All
CO, max
0
ESR ≥ 10 mΩ
All
CO, max
0
Output Current
All
Io
0
Output Current Limit Inception (Hiccup Mode )
All
IO, lim
Output Short-Circuit Current
All
IO, s/c
(VO≤250mV) ( Hiccup Mode )
Efficiency
VIN= 3.3Vdc, TA=25°C
IO=IO, max , VO= VO,set
VIN= 5Vdc
Switching Frequency
Dynamic Load Response
VO,set = 0.6Vdc
η
VO, set = 1.2Vdc
η
VO,set = 1.8Vdc
η
VO,set = 2.5Vdc
η
VO,set = 3.3Vdc
η
All
fsw
⎯
(dIo/dt=10A/μs; VIN = 5V; Vout = 1.5V, TA=25°C)
Load Change from Io= 0% to 50% of Io,max;
Co = 0
Peak Deviation
All
Vpk
Settling Time (Vo<10% peak deviation)
All
ts
Load Change from Io= 50% to 0% of Io,max:
Co = 0
Peak Deviation
Settling Time (Vo<10% peak deviation)
All
Vpk
All
ts
Typ
⎯
⎯
⎯
⎯
⎯
⎯
20
15
⎯
⎯
⎯
0.12
81.2
89.4
91.4
93.9
94.4
600
90
20
100
20
Max
+1.5
+3.0
Unit
% VO, set
% VO, set
3.63
Vdc
+0.4
10
10
5
0.4
0.5
% VO, set
mV
mV
mV
% VO, set
V
35
mVpk-pk
25
mVrms
47
1000
3000
3
200
⎯
μF
μF
μF
Adc
% Io,max
Adc
%
%
%
%
%
kHz
mV
μs
mV
μs
1 External capacitors may require using the new Tunable LoopTM feature to ensure that the module is stable as well as
getting the best transient response. See the Tunable LoopTM section for details.
LINEAGE POWER
3