APXW005A0X3-SRZ Datasheet, PDF (2/21 Pages) Lineage Power Corporation – 9-36V ProLynxTM 5A: Non-Isolated DC-DC Power Modules

Preliminary Data Sheet
9-36V ProLynx^TM 5A: Non-isolated DC-DC Power Modules
July 22, 2010
9 – 36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A output current
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are
absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in
excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for
extended periods can adversely affect the device reliability.
Parameter
Input Voltage
Continuous
Operating Ambient Temperature
(see Thermal Considerations section)
Storage Temperature
Device
Symbol
Min
All
VIN
-0.3
All
TA
-40
All
Tstg
-55
Max
Unit
36
Vdc
85
°C
125
°C
Electrical Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions.
Parameter
Operating Input Voltage
Maximum Input Current
(VIN=9V to 36V, IO=IO, max )
Input No Load Current
Device
All
All
Symbol
Min
Typ
Max
Unit
VIN
9
⎯
36
Vdc
IIN,max
5
Adc
(VIN = 28V, IO = 0, module enabled)
(VIN = 28V, IO = 0, module enabled)
Input Stand-by Current
(VIN = 28Vdc, module disabled)
Inrush Transient
VO,set = 3Vdc
VO,set = 18Vdc
All
IIN,No load
IIN,No load
IIN,stand-by
All
I²t
26
mA
50
mA
3
mA
0.5
A²s
Input Reflected Ripple Current, peak-to-peak
(5Hz to 20MHz, 1μH source impedance; VIN =0 to
All
36V, IO= IOmax ; See Test Configurations)
95
mAp-p
Input Ripple Rejection (120Hz)
All
-24
-45
-60
dB
CAUTION: This power module is not internally fused. An input line fuse must always be used.
This power module can be used in a wide variety of applications, ranging from simple standalone operation to an
integrated part of sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included;
however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies
require a fast-acting fuse with a maximum rating of 8 A (see Safety Considerations section). Based on the
information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a
lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information.
LINEAGE POWER
2