|
EQW025A0P1 Datasheet, PDF (1/25 Pages) Lineage Power Corporation – 36 - 75Vdc Input; 1.2Vdc to 5Vdc Output; 12A to 25A Output | |||
|
Data Sheet
December 12, 2008
EQW012/020/023/025 Series Eighth-Brick DC-DC Converters:
36 - 75Vdc Input; 1.2Vdc to 5Vdc Output; 12A to 25A Output Current
RoHS Compliant
Applications
 Distributed power architectures
 Wireless Networks
 Enterprise Networks
 Optical and Access Network Equipment
 Latest generation ICâs (DSP, FPGA, ASIC) and
Microprocessor powered applications.
Options
 Remote On/Off logic (positive or negative)
 Surface Mount (-S Suffix)
 Short pins
 Alternative output voltage adjustment equations
(1.2V output only, -V Suffix)
Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
 Delivers up to 25A Output current
 High efficiency â 88% at 3.3V full load (Vin = 48Vdc)
 Low output ripple and noise
 Surface mount or through hole
 Industry standard Eight brick footprint
57.9mm x 22.8mm x 8.5mm(MAX)
(2.28in x 0.9in x 0.335in)
 Constant switching frequency
 Remote On/Off Positive logic (primary referenced)
 Remote Sense
 Adjustable output voltage (± 10%)
 Output overvoltage and overcurrent protection
 Input undervoltage lockout
 Output overcurrent and overvoltage protection
 Over-temperature protection
 Wide operating temperature range (-40°C to 85°C)
 UL* 60950-1 Recognized, CSAâ C22.2 No. 60950-1-
03 Certified, and VDEâ¡ 0805 (IEC60950, 3rd edition)
Licensed
 ISO** 9001 and ISO14001 certified manufacturing
facilities
 Meets the voltage and current requirements for
ETSI 300-132-2 and complies with and licensed for
Basic insulation rating per IEC60950 3rd edition
Description
The EQW series, Eighth-brick power modules are isolated dc-dc converters that can deliver up to 25A of output
current and provide a precisely regulated output voltage over a wide range of input voltages (Vi = 36 -75Vdc). The
modules achieve full load efficiency of 88% at 3.3V output voltage. The open frame modules construction, available
in both surface-mount and through-hole packaging, enable designers to develop cost- and space-efficient solutions.
Standard features include remote On/Off, remote sense, output voltage adjustment, overvoltage, overcurrent and
overtemperature protection.
* UL is a registered trademark of Underwriters Laboratories, Inc.
â CSA is a registered trademark of Canadian Standards Association.
â¡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS03-74 ver. 1.23
PDF name: eqw_12-25-ds.pdf
|
▷ |