|
LAX100-NP Datasheet, PDF (1/12 Pages) LEM – Current Transducer LAX SERIES | |||
|
Current Transducer LAX SERIES
IPN = 16 - 100 A
Ref: LAX 100-NP
For the electronic measurement of currents: DC, AC, pulsed .... , with a galvanic isolation
between the primary circuit (high power) and the secondary circuit (electronic circuit).
Maxi. 16.5 mm
Features
⢠Closed loop (compensated) current transducer using the
hall effect
⢠Printed circuit board mounting
⢠Isolated plastic case recognized according to UL 94-V0
⢠Multirange with a single device: 16, 25, 33, 50 and 100 A rms
⢠3 independent primary jumpers.
Applications
⢠AC variable speed drives and servo motor drives
⢠Static converters for DC motor drives
⢠Battery supplied applications
⢠Uninterruptible Power Supplies (UPS)
⢠Switched Mode Power Supplies (SMPS)
⢠Power supplies for welding applications.
Advantages
⢠Excellent accuracy
⢠Very good linearity
⢠Low temperature drift
⢠Optimized response time
⢠Wide frequency bandwidth
⢠No insertion losses
⢠High immunity to external interference
⢠Current overload capability
⢠Height less than 16.5 mm for a simplified integration with
power modules
⢠Low primary inductance.
Standards
⢠EN 50178
⢠UL508 - UR marking
⢠IEC 61010-1-safety.
Application Domain
⢠Industrial.
070213/7
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice.
Page 1/12
www.lem.com
|
▷ |