2096E Datasheet, PDF (1/11 Pages) Lattice Semiconductor – In-System Programmable SuperFAST™ High Density PLD

ispLSI^® 2096E
In-System Programmable
SuperFAST™ High Density PLD
Features
Functional Block Diagram
• SUPERFAST HIGH DENSITY IN-SYSTEM
PROGRAMMABLE LOGIC
— 4000 PLD Gates
— 96 I/O Pins, Six Dedicated Inputs
— 96 Registers
— High Speed Global Interconnect
— Wide Input Gating for Fast Counters, State
Machines, Address Decoders, etc.
— Small Logic Block Size for Random Logic
— 100% Functional/JEDEC Upward Compatible with
ispLSI 2096 Devices
Output Routing Pool (ORP)
C7
C6
C5
C4
A0
DQ
A1
Logic ^{D Q}
A2
GLB ^{Array D Q}
DQ
A3
A4
A5
A6
A7
Output Routing Pool (ORP)
C3
C2
C1
C0
B7
B6
Global Routing Pool
(GRP)
B5
B4
B0
B1
B2
B3
• HIGH PERFORMANCE E²CMOS^® TECHNOLOGY
— fmax = 180 MHz Maximum Operating Frequency
— tpd = 5.0 ns Propagation Delay
— TTL Compatible Inputs and Outputs
— 5V Programmable Logic Core
— ispJTAG™ In-System Programmable via IEEE 1149.1
(JTAG) Test Access Port
— User-Selectable 3.3V or 5V I/O Supports Mixed-
Voltage Systems
— PCI Compatible Outputs
— Open-Drain Output Option
— Electrically Erasable and Reprogrammable
— Non-Volatile
— Unused Product Term Shutdown Saves Power
• ispLSI OFFERS THE FOLLOWING ADDED FEATURES
— Increased Manufacturing Yields, Reduced Time-to-
Market and Improved Product Quality
— Reprogram Soldered Devices for Faster Prototyping
• OFFERS THE EASE OF USE AND FAST SYSTEM
SPEED OF PLDs WITH THE DENSITY AND FLEXIBILITY
OF FIELD PROGRAMMABLE GATE ARRAYS
— Complete Programmable Device Can Combine Glue
Logic and Structured Designs
— Enhanced Pin Locking Capability
— Three Dedicated Clock Input Pins
— Synchronous and Asynchronous Clocks
— Programmable Output Slew Rate Control to
Minimize Switching Noise
— Flexible Pin Placement
— Optimized Global Routing Pool Provides Global
Interconnectivity
• ispDesignEXPERT™ – LOGIC COMPILER AND COM-
PLETE ISP DEVICE DESIGN SYSTEMS FROM HDL
SYNTHESIS THROUGH IN-SYSTEM PROGRAMMING
— Superior Quality of Results
— Tightly Integrated with Leading CAE Vendor Tools
— Productivity Enhancing Timing Analyzer, Explore
Tools, Timing Simulator and ispANALYZER™
— PC and UNIX Platforms
Output Routing Pool (ORP)
Output Routing Pool (ORP)
Description
0919/2096E
The ispLSI 2096E is a High Density Programmable Logic
Device. The device contains 96 Registers, 96 Universal
I/O pins, six Dedicated Input pins, three Dedicated Clock
Input pins, two dedicated Global OE input pins and a
Global Routing Pool (GRP). The GRP provides complete
interconnectivity between all of these elements. The
ispLSI 2096E features 5V in-system programmability
and in-system diagnostic capabilities. The ispLSI 2096E
offers non-volatile reprogrammability of all logic, as well
as the interconnect to provide truly reconfigurable sys-
tems.
The basic unit of logic on the ispLSI 2096E device is the
Generic Logic Block (GLB). The GLBs are labeled A0, A1
.. C7 (see Figure 1). There are a total of 24 GLBs in the
ispLSI 2096E device. Each GLB is made up of four
macrocells. Each GLB has 18 inputs, a programmable
AND/OR/Exclusive OR array, and four outputs which can
be configured to be either combinatorial or
registered.Inputs to the GLB come from the GRP and
dedicated inputs. All of the GLB outputs are brought back
into the GRP so that they can be connected to the inputs
of any GLB on the device.
The device also has 96 I/O cells, each of which is directly
connected to an I/O pin. Each I/O cell can be individually
programmed to be a combinatorial input, output or bi-
directional I/O pin with 3-state control. The signal levels
are TTL compatible voltages and the output drivers can
source 4 mA or sink 8 mA. Each output can be pro-
grammed independently for fast or slow output slew rate
to minimize overall output switching noise. By connecting
Copyright © 1998 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject
to change without notice.
LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A.
Tel. [phone]; 1-800-LATTICE; FAX [phone]; http://www.latticesemi.com
November 1998
2096e_03
1