KYL-GPS Datasheet, PDF (8/10 Pages) SHENZHEN KYL COMMUNICATION EQUIPMENT CO,LTD. – Vehicle Tracker

Shenzhen KYL Communication Equipment Co., Ltd
This tracker suggests to be installed by technical professional of a local service centre. Without
permission, please do not repair and move the tracker by your own. Otherwise, any
unfortunately damage should be compensated by oneself.
Installation steps (caution: the following installation should under no power. if not, the condition
will be dangerous)
1.Power supply line: The red wire connects 12V“+”;Black wire connects to 12V“-”
2. Wire for cutting off oil of the tracker
Yellow wire connects to the relay pin 86; 85 pin connect to 12 V DC, 87 pin and 30 pin in series
power supply circuits. Caution: Wrong connection of yellow wire will damage the tracker.
3. Wire for cutting off circuit of the tracker
White wire connects to relay pin 86; 85 pin to 12 V DC, 87 pin and 30 pin are in series power
supply circuits. Caution: Wrong connection of white wire will damage the tracker.
www.rf-data.com
Fax: [phone]
8
[e-mail]