KYL-GPS Datasheet, PDF (2/10 Pages) SHENZHEN KYL COMMUNICATION EQUIPMENT CO,LTD. – Vehicle Tracker

Shenzhen KYL Communication Equipment Co., Ltd
Content
Ⅰ. Preface…………………………………………....…………………..1
Ⅱ. Attentions……………………………………….. …………………..2
Ⅲ Hardware Description…….……………………….………………. ..3
Ⅳ. Main function…………………………………….…………………. 3
Ⅴ. How to Set up…………………………………………….....………. 4
Ⅵ. Installation Diagram………...…………………...………………...... 7
Ⅶ. Installation…………………………………….….………………..... 7
Ⅷ. Application………………………………………………….…….….9
Ⅸ.Specification…………………………………………….……....…....9
Ⅹ.Guarantee…………………………………………………………….10
Attentions
1. Make sure to read this manual carefully before using the product.
2. Please insert a SIM card before installing, and make sure the SIM card has no password,
otherwise the tracker will not work normally.
3. Please make sure that all the cables of the tracker have been connected accurately, and then
connect the tracker to host power. Must not install or take down the tracker when it is power on.
If you had any troubles or omissions about the connections of cables, please cut off power first,
otherwise you will easily damage the tracker.
4. The tracker works in wireless communications. So please cut off the host power before your
vehicles entering fuel depot or dangerous place.
5. The tracker’s working voltage is 10V-36V. Please use within its working voltage.
6. The host of GPS tracker is a low-power wireless transmitter and receiver. It receives and sends
radio frequency signal when it is working.
7. To avoid electromagnetic interference or uncompatible configuration, please stop using your
tracker in some noticed place.
www.rf-data.com
Fax: [phone]
2
[e-mail]