KK74ACT240 Datasheet, PDF (1/5 Pages) KODENSHI KOREA CORP. – Octal 3-State Inverting Buffer/Line Driver/Line Receiver High-Speed Silicon-Gate CMOS

TECHNICAL DATA
Octal 3-State Inverting Buffer/Line
Driver/Line Receiver
High-Speed Silicon-Gate CMOS
KK74ACT240
The KK74ACT240 is identical in pinout to the LS/ALS240,
HC/HCT240. The KK74ACT240 may be used as a level converter for
interfacing TTL or NMOS outputs to High Speed CMOS inputs.
This octal inverting buffer/line driver/line receiver is designed to be
used with 3-state memory address drivers, clock drivers, and other bus-
oriented systems. The device has inverting outputs and two active-low
output enables.
• TTL/NMOS Compatible Input Levels
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 µA; 0.1 µA @ 25°C
• Outputs Source/Sink 24 mA
ORDERING INFORMATION
KK74ACT240N Plastic
KK74ACT240DW SOIC
T_A = -40° to 85° C for all packages
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 20=V_CC
PIN 10 = GND
FUNCTION TABLE
Inputs
Enable A, A,B
Enable B
L
L
L
H
H
X
X = don’t care
Z = high impedance
Outputs
YA,YB
H
L
Z
1