X5R0402K Datasheet, PDF (3/8 Pages) KOA Speer Electronics, Inc. – Ceramic Chip Capacitors

SS-241 R5
5. Characteristics
Item
Operating
Temperature Range
Capacitance
Dissipation Factor
Requirement
-55°C to +85°C
Within specified tolerance
2.5% for 50V DC rating
5.0% for 10V DC rating
Test Methods
Temperature cycle chamber
Frequency: 1.0 kHz ± 10%
Voltage: 1.0 Vrms ± .2 V
For Cap > 10 µF, 0.5 Vrms @ 120 Hz
Insulation
Resistance
Dielectric
Strength
Resistance to
Flexure Stresses
Solderability
Resistance to
Solder Heat
Thermal Shock
100,000 M or 500 M - µF,
whichever is less
Charge device with rated voltage for
60 ± 5 secs @ room temp/humidity
No breakdown or visual defects
Charge device with 300% of rated voltage for
1-5 seconds, w/charge and discharge current
limited to 50 mA (max)
Appearance
No defects
Capacitance Variation ± 10%
Dissipation Factor Meets initial values
Insulation Resistance Initial Value x 0.3
Deflection: 1 mm Test Time: 30 seconds
90 mm
95% of each terminal should be covered
with fresh solder
Dip device in eutectic solder at 230 ± 5°C
for 5.0 ± 0.5 seconds
Appearance
Capacitance Variation
Dissipation Factor
Insulation Resistance
No defects, < 25% leaching
of either end terminal
± 7.5%
Meets initial values
Meets initial values
Dip device in eutectic solder at 260°C for
60 seconds. Store at room temperature
for 24 ± 2 hours before measuring
electrical properties
Dielectric Strength Meets initial values
Appearance
No visual defects
Capacitance Variation ± 7.5%
Dissipation Factor Meets initial values
Insulation Resistance Meets initial values
Dielectric Strength Meets initial values
Step 1: -55°C ± 2° 30 ± 3 minutes
Step 2: Room temp 3 minutes
Step 3: +85°C ± 2° 30 ± 3 minutes
Step 4: Room temp 3 minutes
Repeat for 5 cycles and measure after
24 ± 2 hours at room temperature
PAGE 3 OF 8
Bolivar Drive ^■ P.O. Box 547 ^■ Bradford, PA 16701 ^■ USA ^■ 814-362-5536 ^■ Fax [phone] ^■ www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.