W1320BP Datasheet, PDF (9/16 Pages) Keysight Technologies – Genesys

09 | Keysight | Genesys - Brochure
Genesys Modulated RF
The Genesys Modulated RF capability extends
the prerequisite System building block by
adding the SystemVue dataflow simulator. It
enables RF designers to easily specify digitally
modulated RF signals to analyze circuits
and systems for digital modulation metrics
such as EVM, BER and ACPR. Included
WLAN and LTE verification libraries assure
design compliance with the latest wireless
standards.
Modulated RF building block
Capability module
Description
SystemVue dataflow simulator
The SystemVue dataflow simulator enables digitally modulated RF signals to be used for
simulating circuits and systems to calculate digital RF figure of merits such as EVM and
ACPR.
It comes with 11 basic PSK and QAM digital modulation schemes, selectable through
a pull down menu on the signal source. Once the digital modulation source is selected,
all dataflow parameters, including data sinks are automatically set up correctly for the
analysis; thus relieving the RF engineer from having to deal with unfamiliar digital signal
processing (DSP) dataflow parameters before starting the simulation.
www.keysight.com/find/eesof-systemvue-engine
Modulated RF budget analysis
The modulated RF budget analysis of EVM, BER and ACPR on the level diagram is a
breakthrough capability in the industry that enables the RF system designer to pinpoint
which components in the system architecture are contributing to EVM, BER or ACPR
failures.
Unlike a single pass/fail simulation, the level diagram indicates stage-by-stage the
relative contribution of each component in the system chain to the overall system
performance. Based on patented fast estimation algorithms, modulated RF budget
analysis also allows interactive tuning of individual component specs to see their relative
impact on EVM, BER or ACPR during design.
www.keysight.com/find/eesof-genesys-modulated-rf
Verification library LTE-3GPP and WLAN 802.11ac
Instead of going through volumes of LTE-3GPP or WLAN802.11ac test and compliance
specifications in trying to set up complicated simulations for verifying your circuit or
system design, Genesys has already done that for you.
The included LTE-3GPP and WLAN 802.11ac verification libraries comes ready set up
with correct default dataflow parameters for the RF engineers to begin the verification
simulations with zero learning curve. This follows the tradition of ease-of-use and instant
productivity that Genesys is always sought after for.
www.keysight.com/find/eesof-systemvue-lte-baseband-verification-library
www.keysight.com/find/eesof-systemvue-wlan-library