W1320BP Datasheet, PDF (8/16 Pages) Keysight Technologies – Genesys

08 | Keysight | Genesys - Brochure
Genesys System Architecture
The Genesys system building block includes
Spectrasys, a comprehensive RF system
architecture and diagnostic simulator, and
WhatIF, an innovative frequency planning
synthesis that instantly identifies spurious-
free bands when designing frequency
conversion systems.
System building block
Capability module
Description
Spectrasys
Interactive RF system architecture design tool that analyses system block diagrams
and diagnoses the root cause of impairments such nonlinear spurious mixing intermods
and mismatches ignored by spreadsheets. Engineered with superior ease-of-use and
integrated with circuit synthesis, simulation, optimization, statistics and EM analysis;
Spectrasys is a convenient tool for RF system design reviews before hardware realization
and thus avoid costly implementation mistakes downstream.
Spectrasys now supports Keysight Sys-Parameters which are frequency, temperature
and bias dependent nonlinear system component models that directly use datasheet
specs supplied by component vendors such as Mini Circuits and Analog Devices. You can
also create spreadsheets of P1dB, IP3, IP2, NF, etc. for use by these models to accurately
simulate off-the-shelf components in your system before purchase.
DC power estimator summarizes the different voltage and current drain required by each
system component to enable the proper sizing of the system power supply. This is an
important aspect of RF system design that other tools neglect.
www.keysight.com/find/eesof-genesys-spectrasys
WhatIF
Unique, graphical frequency-planning synthesis tool that quickly identifies spurious-free
bands across a wide bandwidth involving multiband conversions to a common IF, using
realistic mixers. Useful for designing multiband down-converters with high- and low-side
LO’s. A natural companion to Spectrasys RF system architecture design tool.
www.keysight.com/find/eesof-genesys-whatif