W6153A Datasheet, PDF (8/15 Pages) Keysight Technologies – X-Series Measurement Application

08 | Keysight | N6153A & W6153A DVB-T/H with T2 X-Series Measurement Application - Technical Overview
Key Specifications
Definitions
–– Specifications describe the performance of parameters covered by the
product warranty.
–– 95th percentile values indicate the breadth of the population (≈2σ) of
performance tolerances expected to be met in 95% of cases with a 95%
confidence. These values are not covered by the product warranty.
–– Typical values are designated with the abbreviation "typ." These are
performance beyond specification that 80% of the units exhibit with a 95%
confidence. These values are not covered by the product warranty.
–– Nominal values are designated with the abbreviation "nom." These values
indicate expected performance, or describe product performance that is
useful in the application of the product, but is not covered by the product
warranty.
–– PXA specifications apply to analyzers with frequency options of 526 and
lower. For analyzers with higher frequency options, specifications are not
warranted but performance will nominally be close to that shown in this
section.
Note: Data subject to change
Description
PXA
MXA
EXA
CXA
Channel power
5.60 MHz integration bandwidth −50 dBm (nom)
−50 dBm (nom)
−50 dBm (nom)
−50 dBm (nom)
Absolute power accuracy
20 to 30 °C
± 0.61 dB
(± 0.19 dB 95%)
± 0.82 dB
(± 0.23 dB 95%)
± 0.94 dB
(± 0.27 dB 95%)
± 1.33 dB
(± 0.61 dB 95%)
Measurement floor
−85.9 dBm
−82.9 dBm
−78.9 dBm
−75.9 dBm
Channel power with shoulder attenuation view
5.60 MHz integration bandwidth ML¹ = –15.0 dBm (nom) ML¹ = –16.0 dBm (nom) ML¹ = –16.0 dBm (nom) ML¹ = –15.0 dBm (nom)
Dynamic range, relative
Offset frequency 7.61/ 2 MHz
97.8 dB
92.2 dB
86.9 dB
84.6 dB
+ 500 kHz
(102.8 dB typ)
(98.5 dB typ)
(94.0 dB typ)
(91.8 dB typ)
Power statistics CCDF
Minimum power at RF input
−50 dBm (nom)
−50 dBm (nom)
−50 dBm (nom)
−50 dBm (nom)
Histogram resolution
0.01 dB
0.01 dB
0.01 dB
0.01 dB
Adjacent channel power
Minimum power at RF input;
0 to 55 °C
−36 dBm (nom)
−36 dBm (nom)
−36 dBm (nom)
−36 dBm (nom)
ACPR accuracy
7.61 MHz noise bandwidth, method = IBW
Offset frequency 8 MHz
± 0.20 dB
± 0.44 dB
± 0.94 dB
± 1.37 dB
Spectrum emission mask
8 MHz integration bandwidth, RBW = 3.9 kHz
4.0 MHz offset
Dynamic range, relative
97.8 dB (102.8 dB typ) 92.2 dB (98.5 dB typ) 86.9 dB (94.0 dB typ) 84.5 dB (91.7 dB typ)
Sensitivity, absolute
–114.5 dB
(–118.5 dBm typ)
–110.5 dB
(–115.5 dBm typ)
–105.5 dB
(–111.5 dBm typ)
–102.5 dB
(–108.5 dBm typ)
1.  ML (mixer level) is RF input power minus attenuation