N5469A Datasheet, PDF (7/14 Pages) Keysight Technologies – MIL-STD 1553 Triggering

MIL-STD 1553 Eye-diagram Mask Testing (continued)
In addition to performing system eye-diagram mask testing on every received Data
Word, Keysight provides a variety of MIL-STD 1553 mask files for testing specific
Command or Status Word transmissions received at different input test points in
your system. Figure 7 shows an example of testing Command Words transmitted
from a Bus Controller and received by a Remote Terminal with RTA equal to 0F_HEX.
The following mask files can be downloaded from Keysight’s website at no charge.
– System xfmr-coupled Input.msk
– System direct-coupled Input.msk
– BC to RT xfmr-coupled Input.msk
– BC to RT direct-coupled Input.msk
– RT to BC xfmr-coupled Input.msk
– RT to BC direct-coupled Input.msk
– RT to RT xfmr-coupled Input.msk
– RT to RT direct-coupled Input.msk
Figure 7. BC to RT 0FHEX transformer-coupled input mask test.
Keysight’s InfiniiVision series oscilloscope mask testing is the
only hardware-based mask testing in the oscilloscope industry.
This produces the industry’s fastest mask testing with test rates
up to 100,000 waveforms tested per second. With test rates this
fast the scope can quickly uncover very infrequent anomalies
and provide detailed pass/fail statistics, including a Sigma
quality report. In addition, you have the ability to customize your
testing based on a variety of test criteria including:
– Test continuously
– Test until 1st error detected
– Test until a user-specified number of tests has been satis-
fied
– Test until a user-specified test time has been satisfied
– Test until a user-specified potential Sigma quality has
been satisfied
7