5980-0489E Datasheet, PDF (7/32 Pages) Keysight Technologies – Pulse Pattern and Function

07 | Keysight | Pulse Pattern and Function Arbitrary Generators and Arbitrary Waveform Generator – Brochure
Pulse Generation
Pulse generation and signal parameters
A pulse generator provides full control over all pulse parameters like
timing, levels and edges as shown in the diagram below.
It is used to set up continuous or triggered pulse streams and offers lexibility to address
the most challenging applications.
All parameters can be adjusted to meet the needs of the speciic application. Pulse gen-
eration capability is provided by all models. The pulse function arbitrary noise generator
provides all lexibility to generate ideal and worst-case signals. The Keysight instruments
cover a frequency range from 1 µHz to 5 GHz and an output amplitude range from 50 mV
up to 100 V.
Glitch-free timing changes
The Keysight 81150A, 81160A, 81133A, 81134A, 81110A and N4903B uniquely allow tim-
ing parameter changes, such as changing the frequency, without dropouts or glitches.
This industry-leading feature enables continuous operation without rebooting or reset-
ting the device under test, when measuring a PLL pull-in and hold range for instance, or
to characterize a device over a sweeping clock frequency.
Delay - time
Delay - phase ^{Width duty cycle}
High amp
TTL or ECL
Low offset
Leading
edge
Trailing
edge
Frequency period
Pulse parameters