N9041B-RT2 Datasheet, PDF (6/29 Pages) Keysight Technologies – UXA X-Series Signal Analyzer, Multi-touch

06 | Keysight | N9041B UXA X-Series Signal Analyzer, Multi-touch - Data Sheet
Amplitude Accuracy and Range Specifications
Amplitude Range
Input 1 Specifications
Input 2 (≤ 50 GHz) Nominal
Input 2 (> 50 GHz) Nominal
Measurement range
Preamp Off
Preamp On (Option P50)
DANL¹ to +30 dBm
DANL¹ to +20 dBm
DANL¹ to +30 dBm
DANL¹ to +20 dBm
DANL¹ to +10 dBm
DANL¹ to +10 dBm
Input Mechanical Attenuators (Standard)
Attenuation range
Attenuator 1 (Frequency: 3 Hz to 50 GHz)
Attenuator 2 (Frequency: 3 Hz to 110 GHz)
0 to 70 dB, in 2 dB steps
NA
0 to 70 dB, in 2 dB steps
0/6/14/20 dB, fixed steps
NA
0/6/14/20 dB, fixed steps
Electronic Attenuator (Opt EA3)
Attenuation range (Frequency: 3 Hz to 3.6 GHz)
0 to 24 dB, in 1 dB steps
NA
Maximum Safe Input Level
Input 1 Specifications
Input 2 Nominal
Average total power (with or without preamp)
Input 1 frequency ≤ 50 GHz
Input 2 frequency ≤ 40 GHz
Input 2 frequency > 40 GHz
Input 2 frequency > 40 to ≤ 65 GHz
Input 2 frequency > 65 GHz
+30 dBm (1 W)
NA
NA
NA
NA
NA
+25 dBm (0.32 W)
+25 dBm (0.32 W)
+13 dBm (0.02 W)
+5 dBm (0.003 W)
For all attenuator settings
Attenuator 2 setting = 20 dB
Attenuator 2 setting = 0 dB
Attenuator 2 setting = 0 dB
Peak pulse power
(< 10 μs pulse width, < 1% duty cycle, and
≥ 30 dB input attenuation)
DC volts
+50 dBm (100 W)
± 0.2 Vdc
NA
± 0.2 Vdc
Display Range
Inputs 1 and 2
Log scale
0.1 to 1 dB/division in 0.1 dB steps
1 to 20 dB/division in 1 dB steps (10 display divisions)
Linear scale
10 divisions
Scale units
dBm, dBmV, dBμV, dBmA, dBμA, V, W, A
Frequency Response
Input 1 Specifications
Input 1 95th percentile
Preselector centering applied above 3.6 GHz
Preamp Off (10 dB input attenuation)
3 Hz to 20 MHz
± 0.50 dB
20 to 50 MHz
± 0.40 dB
± 0.24 dB
50 MHz to 3.6 GHz
± 0.35 dB
± 0.14 dB
3.5 to 5.2 GHz
± 1.7 dB
± 0.79 dB
5.2 to 8.4 GHz
± 1.5 dB
± 0.58 dB
8.3 to 13.6 GHz
± 2.0 dB
± 0.49 dB
13.5 to 17.1 GHz
± 2.0 dB
± 0.56 dB
Preamp On (0 dB attenuation)
(Option P50)
17.0 to 22 GHz
22.0 to 26.5 GHz
26.4 to 34.5 GHz
34.4 to 50 GHz
9 kHz to 1 MHz
1 to 50 MHz
± 2.0 dB
± 2.5 dB
± 2.5 dB
± 4.0 dB
± 0.68 dB
± 0.70 dB
± 0.58 dB
± 0.90 dB
± 2.30 dB
± 0.35 dB
± 0.27 dB
50 MHz to 3.6 GHz
± 0.60 dB
± 0.25 dB
3.5 to 5.2 GHz
± 2.0 dB
± 0.91 dB
5.2 to 8.4 GHz
± 2.0 dB
± 0.69 dB
8.3 to 13.6 GHz
± 2.3 dB
± 0.72 dB
13.5 to 17.1 GHz
± 2.5 dB
± 0.69 dB
17.0 to 22 GHz
± 3.0 dB
± 0.79 dB
22.0 to 26.5 GHz
26.4 to 34.5 GHz
34.4 to 50 GHz
± 3.5 dB
± 3.0 dB
± 4.1 dB
± 0.91 dB
± 1.36 dB
± 2.34 dB
1.  DANL: Displayed Average Noise Level